[esp-r] Blind / Shutter Controls etc.

[Dimitris Mantas]

Hi All,

I 'am trying to locate where I can impose blind/shutter controls.
(e.g switching the optics of windows when radiation, temp or other is above a value).

I 've tried the optics controls but can't figure out what data to input.

First, I put a sensor, sensoring radiation on a surface but the program reports back it's going to sense db temp (instead of radiation) on that surface.
Then the actuator is set to actuate the values for the construction chosen (e.g. double, low e glaz.), however I am not asked what the switched values should be
(as it was done in previous esp-r versions).
In in the third menu (period) can't really understand what kind of input is required by the program
(bidirectional ?? and values such as -30, 1 etc.).

Could you please give me a hint of what to do ?

I suppose same querries may emerge for the case of lighting controls etc.

Searched the cookbook but couldn't find my answers.

thanx in advance,

Dimitris

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.strath.ac.uk/archives/esp-r/attachments/20101007/8a71d2d2/attachment.html