[esp-r] Re: Fwd: Re: Re: CFD problem
NALIN SWAROOP
nalin_swaroop at iitb.ac.in
Fri May 15 12:05:13 BST 2009
Dear Aizaz
when I type the following on the terminal
sudo svn co https://esp-r.net/espr/esp-r/branches/development_branch
The following error comes up
svn: OPTIONS of
'https://esp-r.net/espr/esp-r/branches/development_branch': could not
connect to server (https://esp-r.net)
I have set the proxy settings correctly but still it is not able to
download the source code
Regards
Nalin
> Nalin,
>
> install the following from ubuntu synaptic package manager
> - build essential
> - gcc
> - gfortran
> this should ensure that you have an adequate compilation environment.
>
> It is a good idea to spend a day or so reading a good book describing the
> UNIX
> shell and some elementary commands.
>
> 1. Once you get the source replace the file edcfd.F with the one I
> attached
> earlier and try to compile. The way to get the source and compile is as
> follows (on the command line):
>
> svn https://esp-r.net/espr/esp-r/branches/development_branch
>
> this will download the source code onto your hard disk into a folder
> called
> development_branch.
>
> 2. Change directory to this folders source directory via
>
> cd development_branch/src
>
> 3. once here you invoke the installation script to install and compile
> ESP-r.
> This is done by the command
>
> ./Install
>
> most probably you will be using Linux and X11 graphics environment without
> xml
> support (answers to questions you will encounter when running the install
> script)
>
> 4. You will be asked to make sure there is a /usr/esru directory to which
> you
> can install. This is a default and you can change it using the -d switch
>
> Typing ./Install -h should give you a good handle on the various options
> (switches) you can use (understand the options using the good book on
> UNIX).
>
> Once all this is done you should be able to install ESP-r. Once ESP-r is
> installed replace the file edcfd.F and re install the whole thing
>
> There are many variations to installation and other options it is better
> to
> either become better acquainted with general installation patterns for
> open
> source multiplatform software or get some one to install it for you. The
> following url gives a slightly different variant
> http://www.esru.strath.ac.uk/Programs/ESP-r_install.htm
>
> A better document on all the above has been created by a colleague of mine
> which is exactly suited to your needs. you can access at
> http://www.esru.strath.ac.uk/Downloads/downloads.htm#Linux
> from this document leave out the bits to do with virtual machines and OSX
> but
> pay special attention to software needed to develop ESP-r and setting up
> account and folders
>
> -A
>
>
> On Thursday 14 May 2009 09:49, you wrote:
>> I have installed the subversion from the ESP-r central, now what should
>> I
>> do? The file edCFD.F when compiled will give what kind of file? and
>> where
>> should I copy it?I am using the Learnix/Ubuntu based installation.
>>
>>
>> When I try to compile using gcc it gives me the following error
>>
>> ankurgahlot at ubuntu:~/Desktop$ gcc edcfd.F
>>
>> geometry.h:5.1:
>> Included at edcfd.F:57:
>>
>> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN"
>> 1
>> Error: Non-numeric character in statement label at (1)
>> geometry.h:6.1:
>> Included at edcfd.F:57:
>>
>> "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
>> 1
>> Error: Non-numeric character in statement label at (1)
>> geometry.h:6.1:
>> Included at edcfd.F:57:
>>
>> "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
>> 1
>> Error: Unclassifiable statement at (1)
>> geometry.h:7.1:
>> Included at edcfd.F:57:
>>
>> <html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">
>> 1
>> Error: Non-numeric character in statement label at (1)
>> geometry.h:7.14:
>> Included at edcfd.F:57:
>>
>> <html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">
>> 1
>> Error: Empty set of digits in BOZ constant at (1)
>> geometry.h:8.1:
>> Included at edcfd.F:57:
>>
>> <!-- ViewVC :: http://www.viewvc.org/ -->
>> 1
>> Error: Non-numeric character in statement label at (1)
>> geometry.h:9.1:
>> Included at edcfd.F:57:
>>
>> <head>
>> 1
>> Error: Non-numeric character in statement label at (1)
>> geometry.h:9.1:
>> Included at edcfd.F:57:
>>
>> <head>
>> 1
>> Error: Unclassifiable statement at (1)
>> geometry.h:10.1:
>> Included at edcfd.F:57:
>>
>> <title>[esp-r] Log of /branches/Jon_Hand/src/include/geometry.h</title>
>> 1
>> Error: Non-numeric character in statement label at (1)
>> geometry.h:10.1:
>> Included at edcfd.F:57:
>>
>> <title>[esp-r] Log of /branches/Jon_Hand/src/include/geometry.h</title>
>> 1
>> Error: Unclassifiable statement at (1)
>> geometry.h:11.1:
>> Included at edcfd.F:57:
>>
>> <meta name="generator" content="ViewVC 1.0.3" />
>> 1
>> Error: Non-numeric character in statement label at (1)
>> geometry.h:11.1:
>> Included at edcfd.F:57:
>>
>> <meta name="generator" content="ViewVC 1.0.3" />
>> 1
>> Error: Unclassifiable statement at (1)
>> geometry.h:12.1:
>> Included at edcfd.F:57:
>>
>> <link rel="stylesheet" href="/static/vvctemplate/styles.css" type="text/
>> 1
>> Error: Non-numeric character in statement label at (1)
>> geometry.h:12.1:
>> Included at edcfd.F:57:
>>
>> <link rel="stylesheet" href="/static/vvctemplate/styles.css" type="text/
>> 1
>> Error: Unclassifiable statement at (1)
>> geometry.h:14.1:
>> Included at edcfd.F:57:
>>
>> </head>
>> 1
>> Error: Non-numeric character in statement label at (1)
>> geometry.h:14.2:
>> Included at edcfd.F:57:
>>
>> </head>
>> 1
>> Error: Invalid character in name at (1)
>> geometry.h:15.1:
>> Included at edcfd.F:57:
>>
>> <body>
>> 1
>> Error: Non-numeric character in statement label at (1)
>> geometry.h:15.1:
>> Included at edcfd.F:57:
>>
>> <body>
>> 1
>> Error: Unclassifiable statement at (1)
>> geometry.h:16.1:
>> Included at edcfd.F:57:
>>
>> <div class="vc_navheader">
>> 1
>> Error: Non-numeric character in statement label at (1)
>> geometry.h:16.26:
>> Included at edcfd.F:57:
>>
>> <div class="vc_navheader">
>> 1
>> Error: Syntax error in expression at (1)
>> geometry.h:18.1:
>> Included at edcfd.F:57:
>>
>> <form method="get" action="/vvc/espr/">
>> 1
>> Error: Non-numeric character in statement label at (1)
>> geometry.h:18.1:
>> Included at edcfd.F:57:
>>
>> <form method="get" action="/vvc/espr/">
>> 1
>> Error: Unclassifiable statement at (1)
>> geometry.h:20.1:
>> Included at edcfd.F:57:
>>
>> <table style="padding:0.1em;">
>> 1
>> Error: Non-numeric character in statement label at (1)
>> geometry.h:20.30:
>> Included at edcfd.F:57:
>>
>> <table style="padding:0.1em;">
>> 1
>> Error: Syntax error in expression at (1)
>> geometry.h:21.1:
>> Included at edcfd.F:57:
>>
>> <tr>
>> 1
>> Error: Non-numeric character in statement label at (1)
>> Fatal Error: Error count reached limit of 25
>
> --
> Dr Aizaz A Samuel
> Research Fellow
> Department of Mechanical Engineering
> University of Strathclyde
> M324 James Weir Building
> 75 Montrose Street
> Glasgow, UK
> G1 1XJ
>
> T:+44 141 548 5765
> F:+44 141 552 5105
>
More information about the esp-r
mailing list