[esp-r] Re: Import from AutoCAD to ESP-r

[Paulo Tavares]

Good afternoon Jon.

In attach i send you the DXF file (obtained from ESP-r when i exported it 
to DXF).

Best regards:

Paulo Tavares

At 21:03 05-11-2008 +0000, Jon Hand wrote:

>The version 11.5 used in the example below seems to lack some of
>the bug fixes that are currently being moved into the standard version
>of ESP-r.  The geometry file being created has fewer data items than
>are expected (the boundary condition tags are missing).
>
>To test this it would be useful to email me the DXF file that you were
>attempting to read in and I will try it with a different version of the
>source code that may do a better job.
>
>-Jon Hand
>jon at esru.strath.ac.uk
>________________________________________
>From: esp-r-bounces at lists.strath.ac.uk [esp-r-bounces at lists.strath.ac.uk] 
>On Behalf Of Paulo Filipe de Almeida Ferreira Tavares [ptavares at isec.pt]
>Sent: 05 November 2008 11:41
>To: esp-r at lists.strath.ac.uk
>Subject: [esp-r]  Import from AutoCAD to ESP-r
>
>Hi all.
>
>I'm still trying to import a model from AutoCAD (DXF file, version 12) to 
>ESP-r.
>
>This time i made a simple model in ESP-r (the model from the Cookbook) and 
>i have exported it to a DXF file to see the AutoCAD details. This step was ok.
>
>In the next step i tried to import the same DXF created by ESP-r to a new 
>project and few errors have occured (as i list below) and the program 
>(ESP-r) have closed... I tried to open this new model created, but the 
>ESP-r have closed again... Can anyone explain me what happen?
>
>
>«ESP-r Project Manager (prj) Release 11.5.
>
>Copyright 2001-2007 Energy Systems Research Unit.
>
>Using installed version of esprc file.
>
>System configuration file is located in folder:
>
>/home/paulo/testes/cfg/
>
>Resetting path to: testes/cfg/
>
>WARNING: in /opt/esru/esp-r/databases/multicon.db2: 268 0.7500 Clay 
>underfloor 750 mm : Clay
>
>underfloor default 750 mm
>
>the layer thickness value (0.75000) > normal maximum 0.50000!
>
>configuration files in /home/paulo/testes/cfg/
>
>testes.cfg
>
>Based on 2nd line of file:
>
>SECTION
>
>this file is assumed to be a DXF file.
>
>Performing model conversion.
>
>Zone only configuration
>
>Site location: 55.9N 4.1W of local meridian.
>
>Ground reflectivity: constant = 0.20.
>
>Site exposure typical city centre.
>
>WARNING in testes.cfg: no chars found for SHOCC string in:
>
>*shl
>
>It is composed of 2 thermal zones which are described in the following files:
>
>WARNING in testes.cfg: no chars found for remaining text string in:
>
>*shz
>
>Plese check your configuration file.
>
>
>
>Copyright 2001-2007 Energy Systems Research Unit.
>
>Using installed version of esprc file.
>
>Input file is: /home/paulo/Desktop/GP_offices.DXF
>
>The esp-r configuration file will be: testes/cfg/testes.cfg
>
>Scanning the problem before updating...
>
>Project registration configuration
>
>Site location: 55.9N 4.1W of local meridian.
>
>Ground reflectivity: constant = 0.20.
>
>Site exposure typical city centre.
>
>Processing dxf head...
>
>Head processed...
>
>Tables being processed....
>
>Tables processed....
>
>Processing BLOCK section...
>
>Block section processed...
>
>Entities processing...
>
>Entities processed....
>
>End of conversion.
>
>Fatal error: In ../zones/RECEPTION.geo expecting 4 items (insolation data) 
>in...
>
>10, Surf-10 TRAN UNKN UNKNOWN UNKNOWN»
>
>
>
>Regards:
>
>Paulo Tavares
>
>_______________________________________________
>esp-r mailing list
>esp-r at lists.strath.ac.uk
>http://lists.strath.ac.uk/mailman/listinfo/esp-r
-------------- next part --------------
A non-text attachment was scrubbed...
Name: GP_offices.DXF
Type: application/octet-stream
Size: 12293 bytes
Desc: not available
Url : http://lists.strath.ac.uk/archives/esp-r/attachments/20081106/831db2bf/attachment.obj