[esp-r] Re: Weather data time intervals

[Georgios Kokogiannakis]

Hi Francesco,

the answer to your question(s) is yes. This can be done again through the 
temporal definition file (model context-> impose measured data). 
You can select the "Climate data item" and after defining the item select to 
import column data ("Set display period or import raw data" -> "Column 
data"). 
This has been successfully applied many times in the past but all the steps 
involved to define the inputs are sometimes confusing.

Regards,
Georgios



On Wednesday 18 June 2008 16:28, F. G. Azzaro wrote:
> Dear ESP-r users
>
> Is it possible to run a simulation with weather data which has time
> intervals of 10 minutes?
>
> Whilst weather parameters may not change that much every 10 minutes we
> are interested to see how the building & its systems responds to small
> changes.  We have recorded data  from a building in Dublin at 10
> minute intervals can anyone tell us how we convert this to the esp-r
> climate file?  e.g. is it possible to prepare as a csv or txt file
> then simply import into esp-r climate module?  Any advice and guidance
> would be great - many thanks.......
>
> Regards,
>
> Francesco
>
> _______________________________________________
> esp-r mailing list
> esp-r at lists.strath.ac.uk
> http://lists.strath.ac.uk/mailman/listinfo/esp-r

-- 
Energy Systems Research Unit (ESRU)
Department of Mechanical Engineering
University of Strathclyde