[esp-r] simulation errors

[Nuno Fernandes]

Dear ESP-r users 

 

I’m dealing with a simulation problem.

 

In my project I have a vent/hydronic  Network 

 

To evaluate the loads I have done a zone control, until here everything
works fine. Then I have imposed a vent/hydronic control to open windows and
here start my problems.

 

When initiating the simulation the following message appears:

 

MFCNTR: mass flow control connection 1 

               no valid day type for year – day 133

MFCNTR: cannot allocate appropriate day type  

 

Is not a good practice to impose a zone and vent/hydronic control at the
same time? Is it something else? 

 

Thanks in advance,

 

Nuno Fernandes

 

 

 

################################################# 

  Nuno Tiago Afonso Fernandes

 

  Universidade de Aveiro

  Departamento de Engenharia Mecânica

  Campus Universitário de Santiago  

  3810-193 Aveiro  

  Portugal

  Tel.: +351 234 370 830

  nuno.fernandes at mec.ua.pt

  www.ua.pt <http://www.ua.pt/> 

##########################################################

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.strath.ac.uk/archives/esp-r/attachments/20070305/9d56e7cb/attachment.html