[esp-r] Re: Bug ?

[Aizaz Aamir Samuel]

Giulio,

One possible way around the first problem without worrying about the innardsd of
ESP-r is to break your long simulation time period into hourly intervals. Then
you will only get 60 xpm files per simulation and these you can place in
separate folders.

The second problem is more specific to your model and probably more information
is required in order to answer it. One probable cause may be that nothing
changes much in one hour of simulation so you get similar or slightly differing
results.

-Aizaz

Quoting giulio benincasa <gialloneroverde at gmail.com>:

> Hi,
> 
> I Have effected a simulation with *CFD* (in *conflation*) for the period
> 
> start 11 Jul, hr 8.00
> 
> end 11 Jul,  hr 18.00
> 
> *time step 1 minute;*
> 
> In the module of the CFD results I have corresponded two problems:
> 
> one pratical and one bad operation ( probably) ;
> 
> *The first concerns*:
> 
> In the module of the CFD results select
> 
> a) name, view position.....
> 
> b) Image format >> XPM
> 
> c) create image
> 
> 
> so graph come to produced
> 
> name_file__1.xpm ( time 8:01 )
> name_file__2.xpm
> ........
> .......
> .......
> name_file__99.xpm ( time 9:40 )
> 
> *till here automatically, then comes me asked for all remaining minutes (
> from 9:41 to 18:00)*
> **
> *overwrite image in name_file__.xpm*
> 
> *or creating new file; *
> 
> If I overwrite then lose the graph of the minute preceding
> 
> If I creating a new file then I have to create another 500
> 
> *So we go the second problem*:
> 
> In the CFD results module I select
> 
> a*) Output period*
> 
> ((( current result set contains CFD data for the period : 11 Jul, hr 8.00,
> to 11 Jul, hr 18 )))
> 
> I answer
> 
> Day of month, month and time : 11   7    9:00
> Day of month, month and time : 11   7   10.00
> 
> then
> 
> b) view, position...
> 
> c) Image format>>XPM
> 
> d)create image
> 
> 
> but the results are graph all the same;
> 
> There is anybody that can you help me ?
> 
> Thank you in advanced
> 
> Best regards Giulio
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
>   automatically
> 


*****************************
Dr Aizaz A Samuel
University of Strathclyde
Energy Systems Research Unit
James Weir Building
75 Montrose Street
Glasgow, UK
G1 1XJ
Tel +44 141 548 5765
Fax +44 141 552 5105
*****************************