[esp-r] problem with a model including a CFD domain

[Gian Luca Brunetti]

Dear colleagues,
I am trying to make a specific model including a CFD domain work, but I am not succeeding and I cannot find the problem.
I attach the model.
The model has three zones and the network of each is disconnected from the others.
The CFD domain belongs to the short zone sandwiched between the other two. When that zone is modelled as a nodal network, the simulation runs, but when I switch to the CFD modelling, it doesn't. I have tried several routes without success.
I would greatly appreciate any advice.
Thank you in advance and in any case.
Best regards
Gian Luca

Gian Luca Brunetti
Arch. PhD
Politecnico di Milano
DAStU - Dipartimento di Architettura e Studi Urbani / Department of Architecture and Urban Studies
via Bonardi 3, edificio 12 / building 12
20133 Milano
tel. (+39) 02 2399 5750
cell. (+39) 3358040808
email: gianluca.brunetti at polimi.it
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.strath.ac.uk/archives/esp-r/attachments/20240202/240189f9/attachment-0001.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: keyes2fullearthceil_onwhite_new_cfd.zip
Type: application/zip
Size: 143911 bytes
Desc: keyes2fullearthceil_onwhite_new_cfd.zip
Url : http://lists.strath.ac.uk/archives/esp-r/attachments/20240202/240189f9/attachment-0001.zip