[esp-r] Re: Chilled water storage tank

[Marco Manzan]

dear Dimitros,

there are a number of models in Esp-r, basically you could use the stratified tank models, basically there are three of them, one without internal exchangers, one with one exchanger and the last with two internal heat exchangers. I extensively used the models for hot water, but they can be used without problems with chilled water since the model deals with thermal stratification. 

Marco

In data martedì 30 giugno 2015 21:08:04, Dimitrios Sfakianakis ha scritto:
> Dear list,
> 
> Is anyone familiar with efforts to model a chilled water storage tank system in ESP-r and, ideally, its interaction with a chilled water system?
> 
> Thanks!
> 
> Kind regards,
> 
> Dimitrios Sfakianakis MEng
> Dept. Naval Architecture, Ocean and Marine Engineering, University of Strathclyde
> e:dimitrios.sfakianakis at strath.ac.uk
> The University of Strathclyde is a charitable body, registered in Scotland, with registration number SC015263.
> 
> _______________________________________________
> esp-r mailing list
> esp-r at lists.strath.ac.uk
> http://lists.strath.ac.uk/mailman/listinfo/esp-r

-- 
 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _        
|Marco Manzan               Email: manzan at units.it    |        
|Tel:   (+39) 040 5583506   Fax  : (+39) 040  572033  |        
|Dipartimento di Ingegneria e Architettura            |       
|Universita' degli Studi di Trieste                   |        
|piazzale Europa 1, 34127 TRIESTE                     |        
|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|