[esp-r] Re: Shading-insolation file error while simulating

Matias Bottarini Clerici mabotcle at etsii.upv.es
Fri May 16 23:39:56 BST 2014


Hi Achim,

Done! It's fixed, I had to prove to execute the folder from there too.

Thank you for the idea,

Happy Mati
Achim Geissler <achim.geissler at intergga.ch> escribió:

> Hi Matias,
>
> have you tried firing up esp-r from the /cfg folder of your model? I  
> have often found that the most robust (the cfg/../zones ? looks  
> slightly strange).
>
> Best
> Achim
>
>
>
> On May 16, 2014, at 6:27 PM, Matias Bottarini Clerici  
> <mabotcle at etsii.upv.es> wrote:
>
>> Dear all,
>>
>> I've found some problems before simulation is commenced. A message
>> pops up saying:
>>
>> 'Could not find "cfg/../zones/Room_1.shd" 'Continue'
>>
>> ' Zone 1 shading/insolation file cannot be opened.'
>>
>>
>> In order to define the shading obstructions and calculations, I
>> followed all the instructions in the Cookbook plus some other advices
>> like leaving 10 mm between obstructions and zone objects.
>>
>> I checked that the files 'Room_1.shd' and the ASCII 'Room_1.shda' were
>> created in the 'zones' file. Everything seems to be in place. In fact,
>> I can open the 'ish' platform without problems and the shading factor
>> calculations seems to be ok.
>>
>> I've checked the paths of the zone folders in the 'folders & files'
>> option in the Project Manager, and everything it's ok.
>>
>> I've tried to delete and re-define the obstructions and create from
>> scratch the '.shd' files.
>>
>> On the other hand, I've openend the exemplar
>> 'simple/building_shading.cfg' (the one that is defined in the
>> Cookbook) and ran a simulation without problems...
>>
>> I'm using the X11 interface on a Cygwin simulator, so in order to see
>> if there is any problem with the file execution paths, I've tried to
>> open my 'Project.cfg' file from:
>>
>> ~/home/models and ~/home/models/Project
>>
>> and the message stills popping up...
>>
>> I don't know what else to do,
>>
>> Any idea of what could be the problem or some process to follow?
>>
>> THank you very much,
>>
>> Matias
>>
>>
>>
>>
>>
>>
>> _______________________________________________
>> esp-r mailing list
>> esp-r at lists.strath.ac.uk
>> http://lists.strath.ac.uk/mailman/listinfo/esp-r
>>
>
> achim.geissler at intergga.ch
>
>
>
>
>
> _______________________________________________
> esp-r mailing list
> esp-r at lists.strath.ac.uk
> http://lists.strath.ac.uk/mailman/listinfo/esp-r
>

-------------- next part --------------
An embedded message was scrubbed...
From: Achim Geissler <achim.geissler at intergga.ch>
Subject: [esp-r] Re: Shading-insolation file error while simulating
Date: Fri, 16 May 2014 21:05:48 +0200
Size: 6015
Url: http://lists.strath.ac.uk/archives/esp-r/attachments/20140517/89d3f455/attachment.mht 


More information about the esp-r mailing list