[esp-r] Re: plr file

[wakana-m at ec.hokudai.ac.jp]

Dear Jon,

Thank you for prompt reply.
I put my folder on my HOME. Also the simulation result was in HOME.
So the path is not so long. 
And I changed language from Japanese to English.
However I couldn't see the plant result using result analysis and the 
same error was appeared.
I can see .res file, but I can't see .plr file in result analysis.
In addition, I made other building model including plant component(there 
is no control system).
The building result can be read, but the plant result can't be read(
these result file doesn't have any extension).
My disk have enough space.
How can I resolve this problem ?

Best regards,
Wakana Matsumoto

----- Original Message -----
> 
> The plant results file is a binary access file which the fortran code 
in
> the res module knows how to read.  Opening the file in an editor might
> mess up the contents.
> 
> The error message gives a specific line in the source code.  This line
> in the current development_branch version of ESP-r is related to a 
dialog
> asking you to re-specify the name of the plant results file name.
> 
> Suggestion - move your model folder to a location where the path is
> shorter.  Such as a Models sub-folder of your HOME.  Also, go to the
> folder with the model cfg file and start prj or the simulator bps from 
that
> location.  ESP-r does not work well if the path to a file has spaces 
or
> unprintable characters.
> 
> And double check that your disk is not full.
> 
> -Jon Hand
> ________________________________________
> From: esp-r-bounces at lists.strath.ac.uk [esp-r-bounces at lists.strath.ac.
uk] on behalf of wakana-m at ec.hokudai.ac.jp [wakana-m at ec.hokudai.ac.jp]
> Sent: 20 December 2013 10:59
> To: esp-r at lists.strath.ac.uk
> Subject: [esp-r]  plr file
> 
> Dear all,
> 
> I simulated some system+control exemplar models. (e.g. "rudimentary
> mechanical ventilation system", "constant volume air conditioning 
system
> " etc.)
> The simulation could run, but when I choose the .plr file in result
> analysis, the pop-up window was disappeared suddenly.
> And in the Terminal, some sentence was written as below;
> "At line 832 of file moplnt.F
>  Fortran runtime error:End of record"
> 
> When we check the .plr file, should we use other system instead of
> results analysis, or can we modify some file to read .plr file ?
> Now I use ubuntu 12.04 LTS 32-bit.
> 
> Best wishes,
> Wakana Matsumoto
> 
> 
> 
> 
> _______________________________________________
> esp-r mailing list
> esp-r at lists.strath.ac.uk
> http://lists.strath.ac.uk/mailman/listinfo/esp-r
>