[esp-r] Yan: Re: Failed simulation (error:conversion of hvac input: pilot_power value in 0)

[Gül n. Güğül]

Hi,
 
When I am entering the values of (select frantions supplied to) fractions, althought the sum is 1 it is not accepting this. when I check my HVAC file, I saw that esp-r is changing my file by itself. For examplei I selected fracton of a zone as "0.4", but in HVAC file its writing "0.4000001".
 
I have attached my file.
 
Thank you
 

Kimden: Jon Hand <jon at esru.strath.ac.uk>
Kime: Gül n. Güğül <gulgugul at yahoo.com.tr>; "esp-r at lists.strath.ac.uk" <esp-r at lists.strath.ac.uk> 
Gönderildiği Tarih: 8 Mayıs 2013 17:20 Çarşamba
Konu: [esp-r] Re: Failed simulation (error:conversion of hvac input: pilot_power value in 0)



I did a search in the code and the key phrase pilot_power value was found in:

cetc/furnace.F:172:        pilot_energy_con = time_step * pilot_power(isys) * (1 - plrf)

cetc/hvacinput.F:437:c Read the pilot power pilot_power. This is no zero only for furnaces with 
cetc/hvacinput.F:441:    &'hvac input: pilot_power',IER)
cetc/hvacinput.F:442:      pilot_power(i) = val
esruprj/hvacgui.F:951:        CALL EASKR(pilot_power(i),' ','Pilot power (W)',0.1,'F',1000.,
esruprj/hvacgui.F:1987:    &  pilot_power(i), iduct_sys_flag(i), 
esruprj/hvacgui.F:2443:        pilot_power(i)=0.0

So the issue is when reading the model hvac file.  The mention in the warning about
the geometry file name is printing out the
 wrong file name.

Regards, Jon Hand
________________________________________
From: esp-r-bounces at lists.strath.ac.uk [esp-r-bounces at lists.strath.ac.uk] On Behalf Of Gül n. Güğül [gulgugul at yahoo.com.tr]
Sent: 08 May 2013 19:55
To: esp-r at lists.strath.ac.uk
Subject: [esp-r] Failed simulation (error:conversion of hvac input:    pilot_power value in 0)

Hi,

When I am tring to run simulator, I am getting the error below. I checked the geometry of the zones but couldnt find any error.

Failed in ../zones/antre.geo: conversion of hvac
 input: pilot_power value in 0.

Thanks for any help..



_______________________________________________
esp-r mailing list
esp-r at lists.strath.ac.uk
http://lists.strath.ac.uk/mailman/listinfo/esp-r
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.strath.ac.uk/archives/esp-r/attachments/20130509/75693793/attachment-0001.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: atalay.hvac
Type: application/octet-stream
Size: 564 bytes
Desc: not available
Url : http://lists.strath.ac.uk/archives/esp-r/attachments/20130509/75693793/attachment-0001.obj