[esp-r] Re: ESP in windows - the (where is the zone) issue

[Jon Hand]

There is a work-around for that.  Go to the pull-down tab for viewing and
look in the viewing options - you will notice that the viewing angle has been
reset to zero.  Change this to ~40 degrees and you will be able to see
the zone.

This was fixed and if you want a newer version of the Native Windows
Installer I can send you a link to be able to download a newer version.

Regards, Jon Hand

________________________________________
From: esp-r-bounces at lists.strath.ac.uk [esp-r-bounces at lists.strath.ac.uk] On Behalf Of leen peeters [l.f.r.peeters at gmail.com]
Sent: 22 September 2011 08:50
To: esp-r at lists.strath.ac.uk
Subject: [esp-r]  ESP in windows

Hi all,

I downloaded esp for windows and I am building a set of 2 buildings with multiple zones in it
When I am drawing the geometry, I have to open and close the project manager in order to visually see what I just drew. As soon as I add a soon, nothing is visible.
I use approach of starting from a rectangular plan to build zones.

Any suggestions (besides installing linux and running it in there ;-))

Leen