[esp-r] Re: Surface Attributes

[Jon Hand]

If you provide a thermal association between two polygons then there are
several checks that are made in the simulator - their surface normals must
be within a certain angular tollerance so that the two polygons are roughly
parallel with each other, the area of each polygon should be about the
same.  It will then look at the constructions and complain if the number
of layers does not match or the layer materials do not match.

-Jon Hand
________________________________________
From: esp-r-bounces at lists.strath.ac.uk [esp-r-bounces at lists.strath.ac.uk] On Behalf Of Miguel Silva [miguelduartefsilva at hotmail.com]
Sent: 18 October 2010 20:06
To: esp-r at lists.strath.ac.uk
Subject: [esp-r]  Surface Attributes

Hi all,

I have a doubt about surface attributes.

When we have a 2 zones with 1 surface in common, to this surface in "environment" propreties we have to choice the option "surface in other zone" for the program know this surface is a same the surface in another zone, rigth? My question is what happen if he put on the surface of Zone1 different properties on the same surface of Zone2?


someone can enlighten me?


Best regards,
Thank in advance


Miguel Silva

Instituto Politécnico de Leiria - Portugal
<https://signup.live.com/signup.aspx?id=60969>