[esp-r] Re: cannot open stand alone CFD files in DFS

[Achim Geissler]

Hi Fabio

I am not entirely sure, but a look at the file you mention seems to say "old format". Attached is a more recent file that at least opens for me (I didn't run the calculation, though).

Best
Achim

-------------- next part --------------
A non-text attachment was scrubbed...
Name: core.cfd
Type: application/octet-stream
Size: 1671 bytes
Desc: not available
Url : http://lists.strath.ac.uk/archives/esp-r/attachments/20101013/bcb97508/attachment.obj 
-------------- next part --------------



On Oct 13, 2010, at 4:38 PM, Fabio Almeida wrote:

> Hello,
> 
> I am trying to run the CFD module on its own.  I navigate to the CFD training files and try to open any of the *.dfd files using "dfs -file filename.dfd" but I get a IGETEND error.  For example, if I navigate to ".../training/cfd/RoomVent98/CFDonly" and open the file with "dfs -file CFDonly.dfd", the DFS module opens but I get this error:
> 
> "could not find MF node name...."
> "IGETND: error reading cfd file!"
> 
> I browsed through "cfdat.F" file and it seems that the IGETND file is trying to look for mass flow network but gives an error.
> 
> I tried this on ubuntu 10.04 64-bit and cygwin under windows 7 64-bit.  In both cases I tried ESP-r 11.6 pre-comp package and compiled from source from trunk.  Thank you for your time.
> 
> Regards
> 
> Fabio Almeida
> _______________________________________________
> esp-r mailing list
> esp-r at lists.strath.ac.uk
> http://lists.strath.ac.uk/mailman/listinfo/esp-r

achim.geissler at intergga.ch