[esp-r] Re: Crash when adding surface "made from existing verticies"

[Jon Hand]

This is a known bug that was fixed after the version 11.9 version was created.

I can upload a newer version installer to you that fixes this problem.

-Jon
________________________________________
From: Heiko Wöhrle [woehrle at umt-ulm.de]
Sent: 06 September 2010 14:01
To: esp-r at lists.strath.ac.uk
Cc: Jon Hand
Subject: Crash when adding surface "made from existing verticies"

Hi all,

i encountered a bug in the windows 11.9 gcc3 version: when trying to add a surface with "made from existing verticies" the program crashes. Tried a second pc with the same result (but same OS, same hardware...)

Best regards,
Heiko Woehrle


> -----Ursprüngliche Nachricht-----
> Von: esp-r-bounces at lists.strath.ac.uk
> [mailto:esp-r-bounces at lists.strath.ac.uk] Im Auftrag von Jon Hand
> Gesendet: Montag, 6. September 2010 14:39
> An: 한세희; esp-r at lists.strath.ac.uk
> Betreff: [esp-r] Re: [ESP-r] results of Metafile
>
>
> The help message associate with this section of the results
> analysis module states:
>
>  Enquire about:?> ?
>
>  Help options: a) overview b) summary stats c) frequency
> table e) energy balances f) detailed stats g) monthly gain
> loss i) cancel ? f  There are several reports which focus on
> a specific  topic and these are:
>
>   energy delivered - for each zone the delivered kWhrs
>     of sensible heating, sensible cooling, humid-
>     ification, dehumidification are reported as well
>     as the number of hours each was active during the
>     reporting period.
>   . . .
>
> Some additional notes - sensible includes the radiant and
> convective part of the heat injection or extraction
> (the latent part is separatly reported).   And kWhrs is
> energy over time delivered to the room.  If you want to
> know the cost you should post-process the efficiency of the
> actual heating or cooling device.
>
> -Jon Hand
> ________________________________________
> From: esp-r-bounces at lists.strath.ac.uk
> [esp-r-bounces at lists.strath.ac.uk] On Behalf Of 한세희
> [hee1 at dasskorea.com]
> Sent: 06 September 2010 10:13
> To: esp-r at lists.strath.ac.uk
> Subject: [esp-r]  [ESP-r] results of Metafile
>
> Dear all
>
> May I ask you onething ?
> In the Metafile of ESP-r, there are results below as
> *start_xml building/month building/all_zones/supplied_energy/heating
> building/all_zones/supplied_energy/cooling
> building/all_zones/envelope/infiltration/heat_gain
> building/all_zones/envelope/infiltration/heat_loss
> building/all_zones/internal_gains/useful
> building/all_zones/insolation/useful
> building/all_zones/thermal_loads/heating/total
> building/all_zones/thermal_loads/cooling/total
> building/all_zones/envelope/infiltration/heat_gain
> building/all_zones/envelope/infiltration/heat_loss
> building/all_zones/envelope/infiltration/net_flux
> building/all_zones/envelope/walls/net_flux
> building/all_zones/envelope/windows/net_flux
> building/all_zones/envelope/all_components/heat_loss
> building/all_zones/thermal_loads/net
> building/all_zones/energy_balance/net
> building/all_zones/envelope/windows/heat_gain
> building/all_zones/envelope/windows/heat_loss
> building/all_zones/envelope/walls/heat_loss
> building/all_zones/envelope/walls/heat_gain
> building/all_zones/envelope/foundation/heat_loss
> building/all_zones/envelope/foundation/heat_gain
> building/all_zones/envelope/floors/heat_gain
> building/all_zones/envelope/floors/heat_loss
> building/all_zones/envelope/ceilings/heat_loss
> building/all_zones/envelope/ceilings/heat_gain
> building/zone_*/supplied_energy/heating_Perm2
> building/zone_*/supplied_energy/cooling_Perm2
> building/zone_*/thermal_loads/heating/total_Perm2
> building/zone_*/thermal_loads/cooling/total_Perm2
> *end_xml
>
> Would you please let me know what represents the values of
> "Sensible Cooling" and "Sensible Heating"
> at the category of 'energy delivered' which is under 'resluts
> analysis' category on ESP-r?
>
> Regards
>
> Hee
>
> --
> Han Sehee / Team Manager
>
> Design and Simulation for Sustainability(DASS) Solutions Ltd.
> 4F WooAm Building, #355-22 Seogyo-dong, Mapo-gu, Seoul, Rep.
> of Korea (Post Code: 121-838)
>
> T: +82 2 913 2585
> F: +82 2 949 2585
> M: +82 10 5095 8155
>
> www.dasskorea.com<http://www.dasskorea.com>
>
> _______________________________________________
> esp-r mailing list
> esp-r at lists.strath.ac.uk
> http://lists.strath.ac.uk/mailman/listinfo/esp-r
>