[esp-r] Re: CFD problem

[NALIN SWAROOP]

The problem is when I do CFD conflation with network flow and choose the
respective nodes it asks which node is the CFD domain and which connection
represents the openings when I give the respective names it gives the
error that your cells are not compatible with the chosen face. please
redefine and the program stops working at that point.

Nalin






> Dear Nalin,
>
> yes, you must use conflation of the CFD with an air flow network.
>
> Regards
> Achim
>
>
> -----Original Message-----
> From: esp-r-bounces at lists.strath.ac.uk
> [mailto:esp-r-bounces at lists.strath.ac.uk] On Behalf Of NALIN SWAROOP
> Sent: Mittwoch, 22. April 2009 11:50
> To: esp-r at lists.strath.ac.uk
> Subject: [esp-r] CFD problem
>
> Hello all
>
> I have a modeled a single room with 2 opposite windows/openings I have to
> give pressure inlet and pressure outlet for the first case and velocity
> inlet and velocity outlet for the second case now the problem is when I
> use CFD interface it asks for, in the case of pressure BCs inlet and
> outlet pressure and in the case of velocity BCs inlet and outlet velocity
> but these are constant values and I want to run a transient case which
> uses the weather data file to calculate the pressure inlet and outlet and
> velocity inlet and outlet boundary conditions what should I do? should use
> the airflow conflation with CFD.
>
> Regards
>
> Nalin
>
> _______________________________________________
> esp-r mailing list
> esp-r at lists.strath.ac.uk
> http://lists.strath.ac.uk/mailman/listinfo/esp-r
>
>