[esp-r] Re: How to include net_flow_large.h

[Ferguson, Alex]

Hi Christian,  

You'll first need to replace net_flow.h with the net_flow_large.h file,
and then recompile the source code using the 'Install' script. You may
want to make a copy of the original net_flow.h file (perhaps calling it
net_flow_small.h), in case you need to revert your installation back to
the standard distribution later.


Alex Ferguson
Sustainable Buildings and Communities (Housing Group)
CANMET Energy Technology Centre
Natural Resources Canada
P:+1 613 995 3294
F:+1 613 996 9909
Alex.Ferguson at nrcan.gc.ca



-----Original Message-----
From: esp-r-bounces at lists.strath.ac.uk
[mailto:esp-r-bounces at lists.strath.ac.uk] On Behalf Of Christian Anker
Hviid
Sent: Wednesday, September 17, 2008 11:45 AM
To: esp-r at lists.strath.ac.uk
Subject: [esp-r] How to include net_flow_large.h

Hello esp-r community
 
I am modeling a rather large air flow network and want to use
net_flow_large.h that allows up to 199 connections. How do I include
this file in my compiled esp-r?
 
 
 
 
Best regards
 
Christian Anker Hviid
Industrial PhD candidate
 
DTU BYG
Technical University of Denmark
Brovej, building 118
DK-2800 Lyngby
Phone DTU: +45 4525 1886
Phone Alectia: +45 8819 1365
Mail: cah at byg.dtu.dk

_______________________________________________
esp-r mailing list
esp-r at lists.strath.ac.uk
http://lists.strath.ac.uk/mailman/listinfo/esp-r