[esp-r] Re: Unable to specify sensor location in ctl file in vers. 11.5

[Ferguson, Alex]

Hi Christian, 
 
I took a quick look at your note:

*	
	Re #1: I'm unable to reproduce this bug. I find that, after creating a new control file, or selecting an existing one, I can correctly define the sensor location for both zone and plant control loops using the standard prj dialogues. Can you send a description of the steps you followed prior to encountering this error?
*	
	Re #2, I'm not familiar with linkages between plant and mass flow networks. Perhaps someone with more experience in this area can comment?
*	
	Re #3. As you say, you can't adjust the minimum and maximum values associated with plant component parameters. But I'm unsure if this is a new bug, or a long-standing deficiency in pdb. We've made only trivial changes to the pdb code base over the last few years --- can you confirm that this bug was indeed introduced in release 11.5?

Also, please send the output of these commands:

*	$ prj -buildinfo 
*	$ gcc -v

Thanks!

Alex Ferguson
Sustainable Buildings and Communities (Housing Group)
CANMET Energy Technology Centre
Natural Resources Canada
P:+1 613 995 3294
F:+1 613 996 9909
Alex.Ferguson at nrcan.gc.ca

 

________________________________

From: esp-r-bounces at lists.strath.ac.uk on behalf of Christian Anker Hviid
Sent: Fri 09/05/2008 10:43
To: esp-r at lists.strath.ac.uk
Subject: [esp-r] Unable to specify sensor location in ctl file in vers. 11.5



Hello ESP-r community

I did a compilation of the new ESP-r version 11.5 and I have three issues with the program. I don't know where to send them, so here they are.

1. When I specify a control file, I can no longer specify the sensor location. Program simply skips that part.
2. When I link a plant with a mass flow network, the following lines should be written in the pln file, but is not. 'pvs' is the project name.

# Mass flow network definition.

1

../nets/pvs.afn

/usr/esru/esp-r/databases/pressc.db1

../tmp/pvs.mfr



3. In the plant component database I do not have access to change the (min, max) ranges of the input data. I have to change them manually before compilation.





Best regards

Christian Anker Hviid
Industrial PhD candidate

DTU BYG
Technical University of Denmark
Brovej, building 118
DK-2800 Lyngby
Phone DTU: +45 4525 1886
Phone Alectia: +45 8819 1365
Mail: cah at byg.dtu.dk

_______________________________________________
esp-r mailing list
esp-r at lists.strath.ac.uk
http://lists.strath.ac.uk/mailman/listinfo/esp-r