[esp-r] CAD export to esp-r

[Tang, David]

Hi,
 
We have developed CAD toolkits to build and export complex model to esp-r.
The attached image shows the CAD model built in just a few minites. The
esp-r archive shows the result of the import without any manual editing.
 
Any one interested or doubtful thomas can send us a complex model
(20-storey, 150 rooms). Let us do it for you.
 
Regards, 

David Tang 
Chief Engineer, Energy Solutions 
Owens Corning 
T: +86 21 6101 9587; F: +86 21 6101 9588; m: +86 13817249419 

 



The information contained in this communication and its attachment(s) is intended only for the use of the individual to whom it is addressed and may contain information that is privileged, confidential, or exempt from disclosure. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this communication is strictly prohibited. If you have received this communication in error, please notify postmaster at owenscorning.com and delete the communication without retaining any copies. Thank you. 

Translations available: http://www.owenscorning.com/emailfooter.html

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.strath.ac.uk/archives/esp-r/attachments/20071220/b2570ea8/attachment.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: fig-1.gif
Type: image/gif
Size: 5540 bytes
Desc: fig-1.gif
Url : http://lists.strath.ac.uk/archives/esp-r/attachments/20071220/b2570ea8/attachment.gif 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: xxxx.tar
Type: application/x-tar
Size: 2539 bytes
Desc: xxxx.tar
Url : http://lists.strath.ac.uk/archives/esp-r/attachments/20071220/b2570ea8/attachment.tar