[esp-r] Re: Proposed development of window shading models - e mail 2

Geissler Achim Achim.Geissler at josef-gartner.ch
Tue Mar 20 10:06:34 GMT 2007


Hi Gunter,

 

thanks for the angle clarifications (the term "cut off" is quite widely accepted with the definition you gave, I think. However, we do use "solar altitude" for the "projected angle", usually ... is there any significant difference? I couldn't find what difference you see, from the sketch). However, I totally agree that explicit treatment of all angles would simplify any discussions. It would probably be quite a bit clear(er), what is assumed for the calcs.

 

What you write about DIN V 18599 is interesting. Do you have any information on other countries in this regard? I have heard of ideas to have an "accepted EPBD" calculation tool for Europe ... for my understanding of the EPBD and the freedom of individual countries in its implementation, this is not really possible, is it? It would be interesting, of course.

 

Mit freundlichen Grüssen / Best regards

 

Achim Geissler

________________________________

From: esp-r-bounces at lists.strath.ac.uk [mailto:esp-r-bounces at lists.strath.ac.uk] On Behalf Of Pueltz, Gunter
Sent: Tuesday, March 20, 2007 10:23 AM
To: Geissler Achim
Cc: esp-r at lists.strath.ac.uk; Bart Lomanowski
Subject: [esp-r] Re: Proposed development of window shading models - e mail 2

 

2) Defintion of "profile angle e":
The profile angle e is defined as the projection of sun heigt angle a
into a vertical plain, which is normal to the facade (see attached picture).

 

Thus the profile angle can be interpreted as "sun heigt angle" if the sun 

azimuth angle j is not taken into account (e.g. for WIS-results or also

in ESP-r, optical database).

 

Again I propose an enhanced window model for ESP-r, which takes into

account ALL relevant angles (see attachment):

- blinde sloüpe angle

- sun real heigt angle a or alternatively sun height´s profile angle e

- sun azimuth angle j

 
Concerning the official EPBD-oriented planning / calculation tool in Germany, 
called DIN V 18599, I can tell you following:

The DIN V 18599, part 2, defines a so called effectivce g-value, which MUST be

calculated according to EN 13363, part 1 (simplified) or part 2 (detailled and spectral,

but only for ONE angle of 45 degree).

The more sophisticated algorithm of ISO 15099 (implented in WIS) is NOT allowed .......

So it is clear, that all the angle dependancies described above are not valid for the

stupid German DIN V 18599 ......

Best regards,
Gunter

--
Dr. Gunter Pültz

Müller-BBM GmbH
Robert-Koch-Straße 11
82152 Planegg
Telefon +49(89)85602-336
Telefax +49(89)85602-111
http://www.MuellerBBM.de <http://www.muellerbbm.de/>    

HRB München 86143
Geschäftsführer: Bernd Grözinger, Dr. Edwin Schorer, Norbert Suritsch





> -----Original Message-----
> From: Geissler Achim [mailto:Achim.Geissler at josef-gartner.ch <mailto:Achim.Geissler at josef-gartner.ch> ]
> Sent: Tuesday, March 20, 2007 9:44 AM
> To: Pueltz, Gunter; esp-r at lists.strath.ac.uk
> Cc: Bart Lomanowski
> Subject: RE: [esp-r] Re: Proposed development of window shading models
>
>
> Hi Gunter,
> good point on azimuth angle (if it was not already being
> focused on). However, what WIS actually models in regard to
> angle dependany is not so clear to me.
>       - cut off by Venetian type blinds is definitely modelled.
>       - other than that, comparison calculations seem to
> imply that all the angle dependant results are simply
> calculated by the Fresnel equation.
>       - The paper on "new model" for Venetian type blinds:
> The blinds considered are, of course, relatively special
> cases. It would be interesting to see differences for more
> "standard" types of Venetian blinds. Additionally, I do not
> understand why "0°" and "cut-off" gives the same discrepancy.
> Anyway, for typical control scenarios "blind down and closed
> if sun", I assume the simple models do O.K. for most cases.
> Enhancing the model capabilities of ESP-r in this regard is
> very interesting for us, in any case! However, an interesting
> question (at least here in Europe) will be: How do results /
> performance parameters gained with enhanced models fit in
> with the EPBD-oriented planning / calculation tools (for
> Germany e.g. DIN 18599)?
>
> Mit freundlichen Grüssen / Best regards
> 
> Achim Geissler
>
> > -----Original Message-----
> > From: esp-r-bounces at lists.strath.ac.uk [mailto:esp-r-
> > bounces at lists.strath.ac.uk] On Behalf Of Pueltz, Gunter
> > Sent: Tuesday, March 20, 2007 8:30 AM
> > To: esp-r at lists.strath.ac.uk
> > Cc: 'Bart Lomanowski'
> > Subject: [esp-r] Re: Proposed development of window shading models
> >
> > Bart,
> >
> > a short info concerning transmission and absorption of each
> layer of a
> > tmc:
> >
> > The European software "Advanced Window Information System (WIS)",
> > Version 3.0.1, des Window Energy Data Network (WinDat), coordinated
> > by TNO Building and Construction Research (TNO Bouw), Department:
> > Sustainable Energy and Buildings (DEG), The Netherlands (details
> > see http://windat.ucd.ie/wis/html/index.html)
> >
> > is able to calculate both the overall transmission as well as the
> > absorption
> > in each layer of a facade WITH venetian blinds as a function of sun
> > altitude
> > angle (this is the "profile angle" you suggested). The WIS
> software is
> > similar
> > to the WINDOW-software from LBNL, but also treats venetian blinds.
> > Therefore you should use the software WIS for the enhanced
> window model in
> > ESP-r ...
> > An interface between WIS and ESP-r would be a great help
> for ESP-users !!
> >
> > But also WIS shows a crued defect: It is NOT able to take
> the azimuth
> > angle
> > of
> > the sun into account. A recent work from Mr. Kuhn,
> Fraunhofer-Institute of
> > solar
> > energy systems in Freiburg, Germany, has shown, that this
> defect may yield
> > -
> > at critical
> > sun angles - to an underestimation of solar heat gain of appr.
> > 100% !!!!!!!
> > Therefore it would be the best - for my opinion -, if the
> new enhanced
> > facade model
> > (glazing AND blinds) takes into account ALL relevant angles:
> > - the slope angle of the blinds
> > - the sun heigt angle (or the profile angle)
> > - the sun azimuth angle
> > Concerning this topic, Mr. Kuhn has developed a new,
> enhanced algorithm (I
> > assume
> > based on raytracing), which considers all these angles. Please see
> >
> > 1) Tilmann E Kuhn, Solar Control: A general evaluation
> method for facades
> > with venetian blinds or other solar control systems, Energy and
> > Buildings, 38 (2006), 648-660.
> >
> > 2) Tilmann E Kuhn, Solar Control: Comparison of two new
> systems with the
> > state-of-the-art on the basis of a new general evaluation method for
> > facades with venetian blinds or other solar control
> systems, Energy and
> > Buildings, 38 (2006), 661-672.
> >
> > You can also find more information about this new algorithm at the
> > IBPSA-Germany
> > website at MailScanner warning: numerical links are often malicious: http://129.187.44.165/konferenz/paper/2006/108.pdf <http://129.187.44.165/konferenz/paper/2006/108.pdf> 
> >
> > I propose that you contact Mr. Kuhn directly, because he
> has already told
> > his
> > willingness to support or even participate the code
> enhancement of ESP-r.
> > His contact data are following:
> >
> > Dipl.-Phys. Tilmann E. Kuhn
> > Head of Group Solar Facades and Durability Analysis
> > Dept. Thermal Systems and Buildings
> > Fraunhofer Institut für Solare Energiesysteme ISE
> > Heidenhofstr. 2, 79110 Freiburg, Germany
> > Phone: +49 (0) 761/ 4588-5297  Fax: +49 (0)761/ 4588-9297
> > tilmann.kuhn at ise.fraunhofer.de
> > http://www.ise.fraunhofer.de
> >
> > As a stupid ESP user I would appreciate it greatly if all
> experts for
> > facade
> > modelling
> > cooperate for the enhancement of facade modelling in ESP-r  ....
> >
> > Regards,
> > Gunter
> >
> > --
> > Dr. Gunter Pültz
> >
> > Müller-BBM GmbH
> > Robert-Koch-Straße 11
> > 82152 Planegg
> > Telefon +49(89)85602-336
> > Telefax +49(89)85602-111
> > http://www.MuellerBBM.de
> >
> > HRB München 86143
> > Geschäftsführer: Bernd Grözinger, Dr. Edwin Schorer,
> Norbert Suritsch
> >
> >
> >
> >
> >
> > > -----Original Message-----
> > > From: esp-r-bounces at lists.strath.ac.uk
> > > [mailto:esp-r-bounces at lists.strath.ac.uk]On Behalf Of
> Bart Lomanowski
> > > Sent: Monday, March 19, 2007 3:45 PM
> > > To: esp-r at lists.strath.ac.uk
> > > Subject: [esp-r] Re: Proposed development of window shading models
> > >
> > >
> > >
> > > Thanks for all the feedback, I appreciate the interest this
> > > subject has
> > > generated.
> > >
> > > I've attached some ppt slides outlining in more detail our
> > > model capabilities,
> > > the ESP-r development proposal in broad strokes, and some
> > > implementation issues
> > > for discussion. What I am most interested in is the
> > > capabilities of other
> > > ongoing developments (e.g., SHOCC) and the expected
> > > interactions of these
> > > facilities with transparent constructions. Ideally I would
> > > like to retain
> > > generality with respect to the window shading
> developments to ensure
> > > functionality with other windows related projects. I hope a
> > > brief discussion
> > > will be possible at the Developer's conference to shed some
> > > light on this.
> > >
> > > Thanks,
> > >
> > > Bart Lomanowski
> > > University of Waterloo
> > >
> > >
> > >
> > >
> > >
> >
> > _______________________________________________
> > esp-r mailing list
> > esp-r at lists.strath.ac.uk
> > http://lists.strath.ac.uk/mailman/listinfo/esp-r
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.strath.ac.uk/archives/esp-r/attachments/20070320/79e88e4d/attachment-0001.html 


More information about the esp-r mailing list