[esp-r] graphical results

[Nuno Fernandes]

Dear esp-r  user’s 

 

I’m dealing with a problem of graphical results output, this is, I’ve
conducted a simulation with 60 time step in a hour (min by min) an printed
the output results from the simulator (figure 1). When I run the results
analysis an print the same parameters (same zone, output period etc..) the
graphic comes with some huge differences in terms of temperature (figure 2).


 

Can someone explain me why the temperatures are so different for the same
thing?  Why this happen?

 

Thanks in advance.

 

Best regards,

 

Nuno Fernandes

 

 

                                               FIGURE 1- simulator results

 



                                           FIGURE 2- Result Analysis results

 

################################################# 

  Nuno Tiago Afonso Fernandes

 

  Universidade de Aveiro

  Departamento de Engenharia Mecânica

  Campus Universitário de Santiago  

  3810-193 Aveiro  

  Portugal

  Tel.: +351 234 370 830

  nuno.fernandes at mec.ua.pt

  www.ua.pt <http://www.ua.pt/> 

##########################################################

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.strath.ac.uk/archives/esp-r/attachments/20061123/35e4339c/attachment-0001.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 20777 bytes
Desc: not available
Url : http://lists.strath.ac.uk/archives/esp-r/attachments/20061123/35e4339c/attachment-0002.jpe 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 27704 bytes
Desc: not available
Url : http://lists.strath.ac.uk/archives/esp-r/attachments/20061123/35e4339c/attachment-0003.jpe