<html><head><meta http-equiv="Content-Type" content="text/html charset=windows-1252"><base href="x-msg://667/"></head><body style="word-wrap: break-word; -webkit-nbsp-mode: space; -webkit-line-break: after-white-space; ">Hi Arianna,<div><br></div><div>the variable AppCon is "apparent conductivity", the values 0.4 and 0.8 should be found in your input data (conductivity "consol" 0.4 when solid, "conliq" 0.8 when liquid, probably). If you plot the surface/node temperature over time and also the "PCMFAC" in the same plot, the switch between values should happen when the temperature crosses the "melting" and "solidification" temperatures you are using. </div><div><br></div><div>Maybe taking a look at the code (esrubld/spmatl.f, lines 2424 ff.) can help understand some of the variables. The main calculation algorithm is between lines 2532 and 2580 (factf being PCMFAC in the output). It seems strange that you only get the two integer values 1 and 2 as output.</div><div><br></div><div>The input for actual PCM properties is according to lines 2497 ff.:</div><div><br></div><div><div style="margin: 0px; font-size: 11px; font-family: Menlo; color: rgb(0, 143, 0); ">C Melting and solidification temperatures (degC).</div><div style="margin: 0px; font-size: 11px; font-family: Menlo; ">      tmelt=spmdat(ispmnod,1)</div><div style="margin: 0px; font-size: 11px; font-family: Menlo; ">      tsoli=spmdat(ispmnod,2)</div><div style="margin: 0px; font-size: 11px; font-family: Menlo; min-height: 13px; "><br></div><div style="margin: 0px; font-size: 11px; font-family: Menlo; color: rgb(0, 143, 0); ">C Conductivity in solid and liquid phase (W/m.degC).</div><div style="margin: 0px; font-size: 11px; font-family: Menlo; ">      consol=spmdat(ispmnod,3)</div><div style="margin: 0px; font-size: 11px; font-family: Menlo; ">      conliq=spmdat(ispmnod,4)</div><div style="margin: 0px; font-size: 11px; font-family: Menlo; min-height: 13px; "><br></div><div style="margin: 0px; font-size: 11px; font-family: Menlo; color: rgb(0, 143, 0); ">C Specific heat capacity (J/kg.degC).</div><div style="margin: 0px; font-size: 11px; font-family: Menlo; ">      shtsol=spmdat(ispmnod,5)</div><div style="margin: 0px; font-size: 11px; font-family: Menlo; min-height: 13px; "><br></div><div style="margin: 0px; font-size: 11px; font-family: Menlo; color: rgb(0, 143, 0); ">C Latent heat coefficients (J/kg.degC^2 & J/kg.degC respectively).</div><div style="margin: 0px; font-size: 11px; font-family: Menlo; ">      shtliqa=spmdat(ispmnod,6)</div><div style="margin: 0px; font-size: 11px; font-family: Menlo; ">      shtliqb=spmdat(ispmnod,7)</div></div><div><br></div><div>Description of the other h3k variables you mention are (lines 2750 ff.)</div><div><br></div><div><div style="margin: 0px; font-size: 11px; font-family: Menlo; ">         strspm(ispmnod,2)=<span style="color: #b4261a">'/SHCtot'</span></div><div style="margin: 0px; font-size: 11px; font-family: Menlo; ">         unitspm(ispmnod,2)=<span style="color: #b4261a">'(J/kg)'</span></div><div style="margin: 0px; font-size: 11px; font-family: Menlo; ">         txtspm(ispmnod,2)=<span style="color: #b4261a">'Total heat stored in PCM'</span></div><div style="margin: 0px; font-size: 11px; font-family: Menlo; min-height: 13px; "><br></div><div style="margin: 0px; font-size: 11px; font-family: Menlo; ">         strspm(ispmnod,3)=<span style="color: #b4261a">'/SHCarea'</span></div><div style="margin: 0px; font-size: 11px; font-family: Menlo; ">         unitspm(ispmnod,3)=<span style="color: #b4261a">'(J/m^2)'</span></div><div style="margin: 0px; font-size: 11px; font-family: Menlo; ">         txtspm(ispmnod,3)=<span style="color: #b4261a">'Heat stored per PCM area'</span></div></div><div><br></div><div>What number of time steps per hour are you using (see comment by Alaa)?<br><div><div><br></div><div>Good luck.</div><div>Best</div><div>Achim</div><div><br></div><div><br></div><div>On Sep 14, 2014, at 12:12 AM, Arianna Sdei <<a href="mailto:A.Sdei@brighton.ac.uk">A.Sdei@brighton.ac.uk</a>> wrote:</div><br class="Apple-interchange-newline"><blockquote type="cite"><div lang="EN-GB" link="blue" vlink="purple" style="font-family: Helvetica; font-size: medium; font-style: normal; font-variant: normal; font-weight: normal; letter-spacing: normal; line-height: normal; orphans: 2; text-align: -webkit-auto; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-text-size-adjust: auto; -webkit-text-stroke-width: 0px; "><div class="WordSection1" style="page: WordSection1; "><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="font-size: 11pt; font-family: Calibri, sans-serif; color: rgb(31, 73, 125); ">Hi Achim,<o:p></o:p></span></div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="font-size: 11pt; font-family: Calibri, sans-serif; color: rgb(31, 73, 125); "> </span></div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="font-size: 11pt; font-family: Calibri, sans-serif; color: rgb(31, 73, 125); ">thank you. I tried to simulate 2 days in July and see what happens to the temperature of two surfaces. The difference if very minimal, in the order of 0.1k. I could find h3k output and “PCMFAC” variable. In the output I can see that PCMFAC is either a factor of 1 or 2. I can see that the index switches from 1 to 2 at different times for different surfaces. There are other variables such as AppCON which has often an index of 0.4 when PCMFAC is 1 and of 0.8 when PCMFAC is 2, what does that mean? There are other variables like SHCarea, SHCtot, what are they?  Let me know, thank you again.<o:p></o:p></span></div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="font-size: 11pt; font-family: Calibri, sans-serif; color: rgb(31, 73, 125); "> </span></div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="font-size: 11pt; font-family: Calibri, sans-serif; color: rgb(31, 73, 125); ">Best,<o:p></o:p></span></div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="font-size: 11pt; font-family: Calibri, sans-serif; color: rgb(31, 73, 125); "> </span></div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="font-size: 11pt; font-family: Calibri, sans-serif; color: rgb(31, 73, 125); ">Arianna<o:p></o:p></span></div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="font-size: 11pt; font-family: Calibri, sans-serif; color: rgb(31, 73, 125); "> </span></div><div><div style="border-style: solid none none; border-top-width: 1pt; border-top-color: rgb(181, 196, 223); padding: 3pt 0cm 0cm; "><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><b><span lang="EN-US" style="font-size: 10pt; font-family: Tahoma, sans-serif; ">From:</span></b><span lang="EN-US" style="font-size: 10pt; font-family: Tahoma, sans-serif; "><span class="Apple-converted-space"> </span><a href="mailto:esp-r-bounces@lists.strath.ac.uk" style="color: purple; text-decoration: underline; ">esp-r-bounces@lists.strath.ac.uk</a><span class="Apple-converted-space"> </span>[mailto:esp-<a href="mailto:r-bounces@lists.strath.ac.uk" style="color: purple; text-decoration: underline; ">r-bounces@lists.strath.ac.uk</a>]<span class="Apple-converted-space"> </span><b>On Behalf Of<span class="Apple-converted-space"> </span></b>Achim Geissler<br><b>Sent:</b><span class="Apple-converted-space"> </span>11 September 2014 19:57<br><b>To:</b><span class="Apple-converted-space"> </span><a href="mailto:esp-r@lists.strath.ac.uk" style="color: purple; text-decoration: underline; ">esp-r@lists.strath.ac.uk</a><span class="Apple-converted-space"> </span>Club<br><b>Subject:</b><span class="Apple-converted-space"> </span>[esp-r] Re: phase change materials<o:p></o:p></span></div></div></div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><o:p> </o:p></div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; ">Hi Arianna,<o:p></o:p></div><div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><o:p> </o:p></div></div><div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; ">so probably you are using type 53 (you can see that in the .spm file, by the way, "Type").<o:p></o:p></div></div><div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><o:p> </o:p></div></div><div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; ">The PCM should go in the middle node of the innermost layer (or the "plasterboard" layer, in any case). I have no idea what the default parameters in the database are. Did you change the latent heat to meet the actual material you are using? Again, I always found it very informative to have a surface with and without PCM side by side and look at the surface and / or central node temperatures of the layer in question. Did you do that? From these temperatures you can also estimate if you are actually melting / solidifying the PCM as Monika mentioned.<o:p></o:p></div></div><div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><o:p> </o:p></div></div><div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; ">Are you using h3k output? If not, it may be an additional idea. You should find a variable "PCMFAC" in the dictionary. This, I think, is a factor which is 0 for solid and 1 for liquid (or the other way around) and thus gives direct information on what is happening with the PCM.<o:p></o:p></div></div><div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><o:p> </o:p></div></div><div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; ">Best<o:p></o:p></div></div><div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; ">Achim<o:p></o:p></div></div><div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><o:p> </o:p></div></div><div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><o:p> </o:p></div><div><div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; ">On Sep 11, 2014, at 7:53 PM, Arianna Sdei <<a href="mailto:A.Sdei@brighton.ac.uk" style="color: purple; text-decoration: underline; ">A.Sdei@brighton.ac.uk</a>> wrote:<o:p></o:p></div></div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><br><br><o:p></o:p></div><div><div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="font-size: 11pt; font-family: Calibri, sans-serif; color: rgb(31, 73, 125); ">Hi Achim,</span><o:p></o:p></div></div><div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="font-size: 11pt; font-family: Calibri, sans-serif; color: rgb(31, 73, 125); ">I am using phase change plasterboard via the active material database and I am using quite a bit of it. I am using it on all internal walls of two rooms in a house. It makes only a tiny difference to the temperature and I think I am not using it in the right way at the moment. I should be able to see a reduction of 1 or 2k but I am not. What can I look at? can the way I am positioning the material make any difference? I am trying to have the pcm exposed. Let me know,</span><o:p></o:p></div></div><div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="font-size: 11pt; font-family: Calibri, sans-serif; color: rgb(31, 73, 125); ">Thank  you.</span><o:p></o:p></div></div><div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="font-size: 11pt; font-family: Calibri, sans-serif; color: rgb(31, 73, 125); ">Arianna    </span><o:p></o:p></div></div><div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="font-size: 11pt; font-family: Calibri, sans-serif; color: rgb(31, 73, 125); "> </span><o:p></o:p></div></div><div><div style="border-style: solid none none; border-top-width: 1pt; border-top-color: rgb(181, 196, 223); padding: 3pt 0cm 0cm; "><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><b><span lang="EN-US" style="font-size: 10pt; font-family: Tahoma, sans-serif; ">From:</span></b><span class="apple-converted-space"><span lang="EN-US" style="font-size: 10pt; font-family: Tahoma, sans-serif; "> </span></span><span lang="EN-US" style="font-size: 10pt; font-family: Tahoma, sans-serif; "><a href="mailto:esp-r-bounces@lists.strath.ac.uk" style="color: purple; text-decoration: underline; "><span style="color: purple; ">esp-r-bounces@lists.strath.ac.uk</span></a><span class="apple-converted-space"> </span>[mailto:esp-<a href="mailto:r-bounces@lists.strath.ac.uk" style="color: purple; text-decoration: underline; "><span style="color: purple; ">r-bounces@lists.strath.ac.uk</span></a>]<span class="apple-converted-space"> </span><b>On Behalf Of<span class="apple-converted-space"> </span></b>Achim Geissler<br><b>Sent:</b><span class="apple-converted-space"> </span>10 September 2014 18:16<br><b>To:</b><span class="apple-converted-space"> </span><a href="mailto:esp-r@lists.strath.ac.uk" style="color: purple; text-decoration: underline; "><span style="color: purple; ">esp-r@lists.strath.ac.uk</span></a><span class="apple-converted-space"> </span>Club<br><b>Subject:</b><span class="apple-converted-space"> </span>[esp-r] Re: phase change materials</span><o:p></o:p></div></div></div><div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "> <o:p></o:p></div></div><div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; ">Hi Arianna,<o:p></o:p></div></div><div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "> <o:p></o:p></div></div><div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; ">you write you can't see "substantial reduction" - but you do see a reduction? You will need quite a bit of PCM for substantial differences (.gt. 1 to 2 K), probably.<o:p></o:p></div></div><div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "> <o:p></o:p></div></div><div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; ">Which PCM model are you using? I think the basic "53" model cannot really take different temperatures for melting/solidification into account.<o:p></o:p></div></div><div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "> <o:p></o:p></div></div><div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; ">A simple approach for testing: If you have two otherwise identical surfaces, put the PCM in one and then look at the temperature profiles for a day for these surfaces (or split one of the PCM surfaces into two and remove the PCM from one of these). This should quickly give you an idea on if something is happening ("something" may be disappointingly small temperature differences).<o:p></o:p></div></div><div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "> <o:p></o:p></div></div><div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; ">Best<o:p></o:p></div></div><div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; ">Achim<o:p></o:p></div></div><div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "> <o:p></o:p></div></div><div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "> <o:p></o:p></div></div><div><blockquote style="margin-top: 5pt; margin-bottom: 5pt; "><div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span lang="DE-CH" style="font-size: 10pt; font-family: Arial, sans-serif; "> </span><o:p></o:p></div></div><div><div style="border-style: solid none none; border-top-width: 1pt; border-top-color: rgb(181, 196, 223); padding: 3pt 0cm 0cm; "><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><b><span lang="DE" style="font-size: 10pt; font-family: Tahoma, sans-serif; ">Von:</span></b><span class="apple-converted-space"><span lang="DE" style="font-size: 10pt; font-family: Tahoma, sans-serif; "> </span></span><span lang="DE" style="font-size: 10pt; font-family: Tahoma, sans-serif; "><a href="mailto:esp-r-bounces@lists.strath.ac.uk" style="color: purple; text-decoration: underline; "><span style="color: purple; ">esp-r-bounces@lists.strath.ac.uk</span></a><span class="apple-converted-space"> </span>[<a href="mailto:esp-r-bounces@lists.strath.ac.uk" style="color: purple; text-decoration: underline; "><span style="color: purple; ">mailto:esp-r-bounces@lists.strath.ac.uk</span></a>]<span class="apple-converted-space"> </span><b>Im Auftrag von<span class="apple-converted-space"> </span></b>Arianna Sdei<br><b>Gesendet:</b><span class="apple-converted-space"> </span>Mittwoch, 10.<span class="apple-converted-space"> </span></span><span lang="EN-US" style="font-size: 10pt; font-family: Tahoma, sans-serif; ">September 2014 16:59<br><b>An:</b><span class="apple-converted-space"> </span></span><span lang="DE" style="font-size: 10pt; font-family: Tahoma, sans-serif; "><a href="mailto:esp-r@lists.strath.ac.uk" style="color: purple; text-decoration: underline; "><span lang="EN-US" style="color: purple; ">esp-r@lists.strath.ac.uk</span></a></span><span class="apple-converted-space"><span lang="EN-US" style="font-size: 10pt; font-family: Tahoma, sans-serif; "> </span></span><span lang="EN-US" style="font-size: 10pt; font-family: Tahoma, sans-serif; ">Club<br><b>Betreff:</b><span class="apple-converted-space"> </span>[esp-r] phase change materials</span><o:p></o:p></div></div></div><div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span lang="EN-US" style="font-size: 11pt; font-family: Calibri, sans-serif; "> </span><o:p></o:p></div></div><div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="font-size: 11pt; font-family: Calibri, sans-serif; ">Dear All,</span><o:p></o:p></div></div><div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="font-size: 11pt; font-family: Calibri, sans-serif; "> </span><o:p></o:p></div></div><div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="font-size: 11pt; font-family: Calibri, sans-serif; ">I am trying to use phase change materials, phase change plasterboard, via the active components. I am using a melting temperature of 26°C and a solidification temperature of 27°C. I am not sure about the solidification temperature and I would like to know if some of you can advise on this. I am trying to have the PCM exposed, so I always position it on the internal layer as I suppose when the software asks for the position it starts counting the existing layers from the exterior.</span><o:p></o:p></div></div><div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="font-size: 11pt; font-family: Calibri, sans-serif; "> </span><o:p></o:p></div></div><div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="font-size: 11pt; font-family: Calibri, sans-serif; ">However I try, I can’t see any substantial reduction in the indoor temperature during a hot summer month. Can any of you give some advice on how to reduce the indoor temperature further by changing the parameters?</span><o:p></o:p></div></div><div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="font-size: 11pt; font-family: Calibri, sans-serif; "> </span><o:p></o:p></div></div><div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="font-size: 11pt; font-family: Calibri, sans-serif; ">Thank you in advance,</span><o:p></o:p></div></div><div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="font-size: 11pt; font-family: Calibri, sans-serif; "> </span><o:p></o:p></div></div><div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="font-size: 11pt; font-family: Calibri, sans-serif; ">Best regards,</span><o:p></o:p></div></div><div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="font-size: 11pt; font-family: Calibri, sans-serif; "> </span><o:p></o:p></div></div><div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="font-size: 11pt; font-family: Calibri, sans-serif; ">Arianna   </span><o:p></o:p></div></div><div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="font-size: 11pt; font-family: Calibri, sans-serif; "> </span><o:p></o:p></div></div><div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><b><span style="font-size: 14pt; font-family: Calibri, sans-serif; color: rgb(0, 32, 96); ">Arianna Sdei</span></b><o:p></o:p></div></div><div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="font-size: 11pt; font-family: Calibri, sans-serif; color: rgb(0, 32, 96); "> </span><o:p></o:p></div></div><div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="font-size: 11pt; font-family: Calibri, sans-serif; color: rgb(0, 32, 96); ">Research Fellow IFORE (Innovation For Renewal)</span><o:p></o:p></div></div><div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="font-size: 11pt; font-family: Calibri, sans-serif; color: rgb(0, 32, 96); "> </span><o:p></o:p></div></div><div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="font-size: 11pt; font-family: Calibri, sans-serif; color: rgb(0, 32, 96); ">UNIVERSITY OF BRIGHTON</span><o:p></o:p></div></div><div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="font-size: 11pt; font-family: Calibri, sans-serif; color: rgb(0, 32, 96); "> </span><o:p></o:p></div></div><div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="font-size: 11pt; font-family: Calibri, sans-serif; color: rgb(0, 32, 96); ">Moulsecoomb, Lewes Road, Brighton, BN2 4AT</span><o:p></o:p></div></div><div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><b><span style="font-size: 11pt; font-family: Calibri, sans-serif; color: rgb(0, 32, 96); "> </span></b><o:p></o:p></div></div><div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="font-size: 11pt; font-family: Calibri, sans-serif; color: rgb(0, 32, 96); ">mobile: 0044 (0)7981739024</span><o:p></o:p></div></div><div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><b><span style="font-size: 11pt; font-family: Calibri, sans-serif; color: rgb(0, 32, 96); "> </span></b><o:p></o:p></div></div><div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="font-size: 11pt; font-family: Calibri, sans-serif; "> </span><o:p></o:p></div></div><div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><br>___________________________________________________________<br>This email has been scanned by MessageLabs' Email Security<br>System on behalf of the University of Brighton.<br>For more information see<span class="apple-converted-space"> </span><a href="http://www.brighton.ac.uk/is/spam/" style="color: purple; text-decoration: underline; "><span style="color: purple; ">http://www.brighton.ac.uk/is/spam/</span></a><br>___________________________________________________________<o:p></o:p></div></div><div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span lang="DE-CH" style="font-size: 13.5pt; font-family: Helvetica, sans-serif; ">_______________________________________________<br>esp-r mailing list<br><a href="mailto:esp-r@lists.strath.ac.uk" style="color: purple; text-decoration: underline; "><span style="color: purple; ">esp-r@lists.strath.ac.uk</span></a><br><a href="http://lists.strath.ac.uk/mailman/listinfo/esp-r" style="color: purple; text-decoration: underline; "><span style="color: purple; ">http://lists.strath.ac.uk/mailman/listinfo/esp-r</span></a></span><o:p></o:p></div></div></blockquote></div><div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "> <o:p></o:p></div></div><div><div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="font-size: 9pt; font-family: Helvetica, sans-serif; "><a href="mailto:achim.geissler@intergga.ch" style="color: purple; text-decoration: underline; "><span style="color: purple; ">achim.geissler@intergga.ch</span></a></span><o:p></o:p></div></div><div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="font-size: 9pt; font-family: Helvetica, sans-serif; "> </span><o:p></o:p></div></div><div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="font-size: 9pt; font-family: Helvetica, sans-serif; "> </span><o:p></o:p></div></div><div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "> <o:p></o:p></div></div></div><div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><br><br>___________________________________________________________<br>This email has been scanned by MessageLabs' Email Security<br>System on behalf of the University of Brighton.<br>For more information see<span class="apple-converted-space"> </span><a href="http://www.brighton.ac.uk/is/spam/" style="color: purple; text-decoration: underline; "><span style="color: purple; ">http://www.brighton.ac.uk/is/spam/</span></a><br>___________________________________________________________<o:p></o:p></div></div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="font-size: 13.5pt; font-family: Helvetica, sans-serif; "><br>___________________________________________________________<br>This email has been scanned by MessageLabs' Email Security<br>System on behalf of the University of Brighton.<br>For more information see<span class="apple-converted-space"> </span><a href="http://www.brighton.ac.uk/is/spam/" style="color: purple; text-decoration: underline; "><span style="color: purple; ">http://www.brighton.ac.uk/is/spam/</span></a><br>___________________________________________________________<br>_______________________________________________<br>esp-r mailing list<br><a href="mailto:esp-r@lists.strath.ac.uk" style="color: purple; text-decoration: underline; "><span style="color: purple; ">esp-r@lists.strath.ac.uk</span></a><br><a href="http://lists.strath.ac.uk/mailman/listinfo/esp-r" style="color: purple; text-decoration: underline; "><span style="color: purple; ">http://lists.strath.ac.uk/mailman/listinfo/esp-r</span></a><o:p></o:p></span></div></div></div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><o:p> </o:p></div><div><div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="font-size: 9pt; font-family: Helvetica, sans-serif; "><a href="mailto:achim.geissler@intergga.ch" style="color: purple; text-decoration: underline; ">achim.geissler@intergga.ch</a><o:p></o:p></span></div></div><div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="font-size: 9pt; font-family: Helvetica, sans-serif; "> </span></div></div><div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><span style="font-size: 9pt; font-family: Helvetica, sans-serif; "> </span></div></div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><o:p> </o:p></div></div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><o:p> </o:p></div></div><div style="margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; "><br>___________________________________________________________<br>This email has been scanned by MessageLabs' Email Security<br>System on behalf of the University of Brighton.<br>For more information see<span class="Apple-converted-space"> </span><a href="http://www.brighton.ac.uk/is/spam/" style="color: purple; text-decoration: underline; ">http://www.brighton.ac.uk/is/spam/</a><br>___________________________________________________________<o:p></o:p></div></div><br clear="both">___________________________________________________________<br>This email has been scanned by MessageLabs' Email Security<br>System on behalf of the University of Brighton.<br>For more information see<span class="Apple-converted-space"> </span><a href="http://www.brighton.ac.uk/is/spam/" style="color: purple; text-decoration: underline; ">http://www.brighton.ac.uk/is/spam/</a><br>___________________________________________________________</div></blockquote></div><br><div apple-content-edited="true"> <span class="Apple-style-span" style="border-collapse: separate; font-size: 12px; border-spacing: 0px; "><div><a href="mailto:achim.geissler@intergga.ch">achim.geissler@intergga.ch</a></div><div><br></div><div><br></div></span><br class="Apple-interchange-newline"> </div> <br></div></body></html>