<html> <head> <style></style></head> <body class='hmmessage'><div dir='ltr'> Hi, ESP-specialists. <br><br>I have a problem about the importing the .DXF to Esp-r. I have read all the mails related to this topic in our archive and the DXF I am using is exported from a current model from Esp-r.<br><br> After I created a new model in project manager .under "import & export" , import CAD file, choose DXF (version 12). Esp-r asks "proceed with CAD package(no will just generate this file)", press "yes", while at the same time an indication is given" task terminated with an error condition",but you are still asked "import the CAD transfer file" ,press "yes". "File to import" ,just give the full path of the .DXF , for example"C:\Esru\Models\test\<div id=":1ev"><wbr>office.dxf". After that Esp-r asks me to specify the system configuration file,I choose " office.cfg". Esp-r tells me that "problem with configuration line:translation from Autocad", in the end it says "while reading the model configuration file a problem was detected . try again?" but if tried another time, "problem with configuration line:translation from Autocad" showed another time...<br> <br>Did I make some mistake? I am using Winows XP. the revision of Esp-r is the one available in the official website now.<br><br>Thanks.</div><br><br><div><i>Suo Hua</i></div> <div><i> </i></div> <div><i>Ph.D Student in Tecnologia e Progetto per l'Ambiente Costruito/Technology and Design for Environment and Building</i></div> <div><i> </i></div> <div><i>Il Dipartimento B.E.S.T.Dipartimento di Scienza e Tecnologie dell’Ambiente Costruito/ The Department of Building Environment Science & Technology</i></div> <div><i> </i></div> <div><i>Politecnico Di Milano</i></div><br> <div><a href="mailto:Email%3Ahua.suo@mail.polimi.it"><i>Email:hua.suo@mail.polimi.it</i></a></div><br>  <br>  <br>  <br>  <br>  <br> </div></body> </html>