<html><head><style type="text/css"></style></head><body><div style="font-family:arial,helvetica,sans-serif;font-size:10pt"><div>Hello, I had the same problem initially. The reason is indeed your computer's regional settings. If the standard decimal symbol for Portugal is a comma, ESP-r won't accept dot separated decimals. Even if you enter data with comma as a decimal symbol, ESP-r will still not accept it. You don't have to change the region on your system, just the decimal symbol under Control Panel>Regional Settings>Customize  (at least for Windows systems). Hope this helps! </div><div style="font-family: arial,helvetica,sans-serif; font-size: 10pt;"> <div style="font-family: arial,helvetica,sans-serif; font-size: 13px;"><hr size="1">From: Jon Hand <jon@esru.strath.ac.uk> To: Jorge Carlos <jcarlos@ubi.pt>; "esp-r@lists.strath.ac.uk" <esp-r@lists.strath.ac.uk> Sent: Fri, September 10, 2010 9:17:27 AM Subject: [esp-r] Re: ESP-r (editing of initial room size) A user sent a screen shot with an editing dialog... This is the first report of a vertex editing not accepting information after the dot.  This task was recently done on several different machine types so it might be something related to your specific computer. We notice that the email address is Portugal - double check that your computer LOCALLE is set to a region where the decimal place is a dot rather than a comma. It is not clear from the image what operating system you are using `or what version of ESP-r you are using (such information would be very helpful). And there are several facilities available in ESP-r to allow you to modify a room which is not the correct size - look in the 'transforms' option in either the 'surface list' menu or you can edit the xyz values of the coordinates in the 'vertices' menu.  You can see ideas about this in the ESP-r Cookbook. -Jon Hand ________________________________________ From: <a ymailto="mailto:esp-r-bounces@lists.strath.ac.uk" href="mailto:esp-r-bounces@lists.strath.ac.uk">esp-r-bounces@lists.strath.ac.uk</a> [<a ymailto="mailto:esp-r-bounces@lists.strath.ac.uk" href="mailto:esp-r-bounces@lists.strath.ac.uk">esp-r-bounces@lists.strath.ac.uk</a>] On Behalf Of Jorge Carlos [<a ymailto="mailto:jcarlos@ubi.pt" href="mailto:jcarlos@ubi.pt">jcarlos@ubi.pt</a>] Sent: 09 September 2010 19:50 To: <a ymailto="mailto:esp-r@lists.strath.ac.uk" href="mailto:esp-r@lists.strath.ac.uk">esp-r@lists.strath.ac.uk</a> Subject: [esp-r]  ESP-r Dear Mr! <mailto:<a ymailto="mailto:jeremy@esru.strath.ac.uk" href="mailto:jeremy@esru.strath.ac.uk">jeremy@esru.strath.ac.uk</a>> I’m learning how to work with ESP-r to use it in further simulations’ research but there is a problem right at the beginning. The input dimensions, as you can see in the attached file, was 5.500 3.350 2.700. In this case I’ve just changed the default values (5.000 3.000 2.700). The results became 5.0000 3.0000 2.0000. I’ve tried several different ways to introduce the geometry that I wanted, but the results were always the same. It seems that the program doesn’t accept of a number that are right from the dot. Can you help me about this? Thank you. Sincerely yours, Jorge S. Carlos Architect, Doctorate, Researcher C-MADE - Centre of Materials and Building Technologies UBI - University of Beira Interior - Covilhã - Portugal ________________________________ UBI amiga do ambiente: Antes de imprimir este e-mail pense bem se tem mesmo que o fazer. As árvores são um bem imprescindível. _______________________________________________ esp-r mailing list <a ymailto="mailto:esp-r@lists.strath.ac.uk" href="mailto:esp-r@lists.strath.ac.uk">esp-r@lists.strath.ac.uk</a> <a target="_blank" href="http://lists.strath.ac.uk/mailman/listinfo/esp-r">http://lists.strath.ac.uk/mailman/listinfo/esp-r</a> </div></div> </div> </body></html>