*DFS V2.2 # Zone air movement description.
*conflation 3  # mass flow and cfd cooperate for solution
*title ...                                                                     
# user supplied notes for this domain
*thermal_geom
*vrts    1   2   4   5
# Ze is 0 if orthogonal
*regions    1   1   1   0  # regions in X Y Zw Ze directions
# Negative cell number enables symetrical gridding.
*xregion
  30   3.000   1.000 # no cells, length, power law coeff
*yregion
  25   5.000   1.000 # no cells, length, power law coeff
*zwregion
  30   3.000   1.000 # no cells, length, power law coeff
# Define the volumes for the CFD domain.
*volumes   14
# name  type  Ii If Ji Jf Ki Kf
Open1        South    6  25   1   1  11  20
Open2        North    6  25  25  25  11  20
roof         High     1  30   1  25  30  30
floor        Low      1  30   1  25   1   1
westWall     West     1   1   1  25   1  30
eastWall     East    30  30   1  25   1  30
sthleft      South    1   5   1   1   1  30
sthbottom    South    6  25   1   1   1  10
sthtop       South    6  25   1   1  21  30
sthright     South   26  30   1   1   1  30
nrthleft     North    1   5  25  25   1  30
nrthbottom   North    6  25  25  25   1  10
nrthtop      North    6  25  25  25  21  30
nrthright    North   26  30  25  25   1  30
# Solid boundary conditions.
*solids 
roof         Temp  25.00 | Confl   0 Top-5       
floor        Temp  25.00 | Confl   0 Base-6      
westWall     Temp  25.00 | Confl   0 Wall-4      
eastWall     Temp  25.00 | Confl   0 Wall-2      
sthleft      Temp  25.00 | Confl   0 Wall-1      
sthbottom    Temp  25.00 | Confl   0 Wall-1      
sthtop       Temp  25.00 | Confl   0 Wall-1      
sthright     Temp  25.00 | Confl   0 Wall-1      
nrthleft     Temp  25.00 | Confl   0 Wall-3      
nrthbottom   Temp  25.00 | Confl   0 Wall-3      
nrthtop      Temp  25.00 | Confl   0 Wall-3      
nrthright    Temp  25.00 | Confl   0 Wall-3      
# Air flow boundary conditions.
*air_flow 
Open1        Pressure  1.52
Open2        Pressure  0.00
# Internal sources.
*contaminants(   0 contaminants, humdity is contaminant number   0 )
# Blockages.
*blockages
*solution_methods
Turbulence 1 # k-e model
Buoyancy 0 # ignored
# Equations to be solved:
*solution_equations
#  Type  Initial value  Relaxation type and factor
Pressure    1.000 Linear  0.700
Vel U  0.100E-02 Linear  0.280
Vel V  0.100E-02 Linear  0.280
Vel W  0.100E-02 Linear  0.280
Ted  0.500     Linear  0.700    
Epd  0.500     Linear  0.700    
# Iteration control.
*iteration 
   500  0.1000E-02 No
*monitor   15   1  15  CFD.mon
*reint  NO
*svf  1  # frequency of results writing