From jon at esru.strath.ac.uk Mon Jan 22 09:41:00 2024 From: jon at esru.strath.ac.uk (Jon Hand) Date: Mon, 22 Jan 2024 09:41:00 +0000 Subject: [esp-r] Re: 2d/3d heat conduction In-Reply-To: <5C3B5ECE-1AFD-43B3-BF95-AF49C492D0AD@acatalepsy.ch> References: <5C3B5ECE-1AFD-43B3-BF95-AF49C492D0AD@acatalepsy.ch> Message-ID: I have recently looked into the grd module and corrected some code glitches. The interface is working better. I need to find some models that used to work in the past to see what happens. And please use my new email address..... jon.in.glasgow at googlemail.com And a slightly old 'happy new year'. -Jon ________________________________ From: esp-r-bounces at lists.strath.ac.uk on behalf of achim.geissler Sent: 08 November 2023 19:20 To: Lars O. Grobe Cc: esp-r at lists.strath.ac.uk Subject: [esp-r] Re: 2d/3d heat conduction Hi?ya Lars, look at the ?gridding? training model - I think that uses the 3d simulation. Years ago, I tried getting the feature to work, however, to no avail, as far as I recall. So don?t hold your breath ? Best Achim On 8 Nov 2023, at 19:47, Lars O. Grobe wrote: Dear all, ESP-r's capability to model heat conduction not only orthogonal to surfaces, but also refined in 2d and 3d, is mentioned several times in the documentation. However I have not been able to find any information about how to do that so far. Is there any documentation, publication, example introducing this feature available? Best, Lars. _______________________________________________ esp-r mailing list esp-r at lists.strath.ac.uk http://lists.strath.ac.uk/mailman/listinfo/esp-r achim.geissler at acatalepsy.ch -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.strath.ac.uk/archives/esp-r/attachments/20240122/faa18ba4/attachment.html From gianluca.brunetti at polimi.it Fri Feb 2 17:08:20 2024 From: gianluca.brunetti at polimi.it (Gian Luca Brunetti) Date: Fri, 2 Feb 2024 17:08:20 +0000 Subject: [esp-r] Problem with CFD model Message-ID: Dear colleagues, I am trying to make a specific model including a CFD domain work, but I am not succeeding and I cannot find the problem. This is a link to the zipped model: https://polimi365-my.sharepoint.com/:u:/g/personal/10026736_polimi_it/EXEPZrwXGIBMmFZRUGC5uEcBaJEhCeby-xdoRZOYuu9LAw?e=xNQ81I The model has three zones and the network of each is disconnected from the others. The CFD domain belongs to the short zone sandwiched between the other two. When that zone is modelled as a nodal network, the simulation runs, but when I switch to the CFD modelling, it doesn't. I have tried several routes without success. I would greatly appreciate any advice. Thank you in advance and in any case. Best regards Gian Luca Gian Luca Brunetti Politecnico di Milano DAStU- Department of Architecture and Urban Studies / Dipartimento di Architettura e Studi Urbani via Bonardi 3, building 12 20133 Milano tel. (+39) 02 2399 5750 cell. (+39) 335 8040808 email: gianluca.brunetti at polimi.it From gianluca.brunetti at polimi.it Fri Feb 2 16:47:49 2024 From: gianluca.brunetti at polimi.it (Gian Luca Brunetti) Date: Fri, 2 Feb 2024 16:47:49 +0000 Subject: [esp-r] problem with a model including a CFD domain Message-ID: Dear colleagues, I am trying to make a specific model including a CFD domain work, but I am not succeeding and I cannot find the problem. I attach the model. The model has three zones and the network of each is disconnected from the others. The CFD domain belongs to the short zone sandwiched between the other two. When that zone is modelled as a nodal network, the simulation runs, but when I switch to the CFD modelling, it doesn't. I have tried several routes without success. I would greatly appreciate any advice. Thank you in advance and in any case. Best regards Gian Luca Gian Luca Brunetti Arch. PhD Politecnico di Milano DAStU - Dipartimento di Architettura e Studi Urbani / Department of Architecture and Urban Studies via Bonardi 3, edificio 12 / building 12 20133 Milano tel. (+39) 02 2399 5750 cell. (+39) 3358040808 email: gianluca.brunetti at polimi.it -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.strath.ac.uk/archives/esp-r/attachments/20240202/240189f9/attachment-0001.html -------------- next part -------------- A non-text attachment was scrubbed... Name: keyes2fullearthceil_onwhite_new_cfd.zip Type: application/zip Size: 143911 bytes Desc: keyes2fullearthceil_onwhite_new_cfd.zip Url : http://lists.strath.ac.uk/archives/esp-r/attachments/20240202/240189f9/attachment-0001.zip From gianluca.brunetti at polimi.it Mon Feb 5 15:14:16 2024 From: gianluca.brunetti at polimi.it (Gian Luca Brunetti) Date: Mon, 5 Feb 2024 15:14:16 +0000 Subject: [esp-r] problem with a CFD model Message-ID: Dear list, I am trying to make a specific model including a CFD domain work, but I am not succeeding and I cannot find the problem. This is a link to the model: [https://res.cdn.office.net/assets/mail/file-icon/png/folder_16x16.png]espfile It is a simple model. There are three zones and the intermediate one has been modelled both with a mass-flow network and as a CFD domain, but the simulation runs only in the former case. I would greatly appreciate any advice. Thank you in advance. Best regards Gian Luca Gian Luca Brunetti Arch. PhD Politecnico di Milano DAStU - Dipartimento di Architettura e Studi Urbani / Department of Architecture and Urban Studies via Bonardi 3, edificio 12 / building 12 20133 Milano tel. (+39) 02 2399 5750 cell. (+39) 3358040808 email: gianluca.brunetti at polimi.it -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.strath.ac.uk/archives/esp-r/attachments/20240205/41037443/attachment.html From jon.in.glasgow at googlemail.com Tue Feb 13 15:55:44 2024 From: jon.in.glasgow at googlemail.com (Jon Hand) Date: Tue, 13 Feb 2024 15:55:44 +0000 Subject: [esp-r] looking for ESP-r models using component based air source heat pumps Message-ID: I am interested in finding past ESP-r models that have used either component 360 (CMP36C/S in the code) a reversible heat pump which uses a quadratic to capture COP, or the more complex component 450 (CMP45C/S in the code) which has separate curves for COP and for the compressor. In particular how available performance data (mfg tend to put the best data in places we can't see) into the attributes that ESP-r can use. I would like to improve the code documentation and tutorials for modelling ASHP variants. Regards, Jon Hand, Glasgow -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.strath.ac.uk/archives/esp-r/attachments/20240213/e7d13e9d/attachment.html From labruyere.jerome at gmail.com Wed Feb 14 16:35:14 2024 From: labruyere.jerome at gmail.com (=?UTF-8?B?TEFCUlVZRVJFIErDqXLDtG1l?=) Date: Wed, 14 Feb 2024 17:35:14 +0100 Subject: [esp-r] discovery of the software Message-ID: Hello, I would like to discover the ESP r software and I only have an old computer running Windows 7 - 64 bits. Can you send me a link for a native windows version for ESP r ? Thanks a lot ! J?r?me Sans virus.www.avast.com <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2> -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.strath.ac.uk/archives/esp-r/attachments/20240214/8da1b51f/attachment.html From sabinehoffmann8 at googlemail.com Wed Feb 28 19:33:09 2024 From: sabinehoffmann8 at googlemail.com (Sabine Hoffmann) Date: Wed, 28 Feb 2024 20:33:09 +0100 Subject: [esp-r] Climate file TRY 2010 for Germany (Potsdam) in esp-r format? Message-ID: <96E107EE-3325-40A5-BA8D-0C9B82B6CDEE@googlemail.com> Dear (German) esp-r users, does anyone have TRY2010_4.epw for Potsdam, Germany, available, ideally already adjusted for use in esp-r? I would be extremely grateful. Best regards Sabine From sabinehoffmann8 at googlemail.com Wed Feb 28 19:37:26 2024 From: sabinehoffmann8 at googlemail.com (Sabine Hoffmann) Date: Wed, 28 Feb 2024 20:37:26 +0100 Subject: [esp-r] Please sign me up - thanks Message-ID: <9B3A64BD-580B-4B01-BAD4-FACCDD832951@googlemail.com> From graeme.flett at strath.ac.uk Wed Feb 28 21:20:25 2024 From: graeme.flett at strath.ac.uk (Graeme Flett) Date: Wed, 28 Feb 2024 21:20:25 +0000 Subject: [esp-r] Re: Climate file TRY 2010 for Germany (Potsdam) in esp-r format? In-Reply-To: <96E107EE-3325-40A5-BA8D-0C9B82B6CDEE@googlemail.com> References: <96E107EE-3325-40A5-BA8D-0C9B82B6CDEE@googlemail.com> Message-ID: Hi Sabine The link below has TRY2010 data for Potsdam. The zip file has several formats including epw and ESPr clm format. https://climate.onebuilding.org/WMO_Region_6_Europe/DEU_Germany/index.html Graeme ________________________________ From: esp-r-bounces at lists.strath.ac.uk on behalf of Sabine Hoffmann Sent: 28 February 2024 19:33 To: esp-r at lists.strath.ac.uk Subject: [esp-r] Climate file TRY 2010 for Germany (Potsdam) in esp-r format? Dear (German) esp-r users, does anyone have TRY2010_4.epw for Potsdam, Germany, available, ideally already adjusted for use in esp-r? I would be extremely grateful. Best regards Sabine _______________________________________________ esp-r mailing list esp-r at lists.strath.ac.uk http://lists.strath.ac.uk/mailman/listinfo/esp-r -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.strath.ac.uk/archives/esp-r/attachments/20240228/38484d34/attachment.html From sabinehoffmann8 at googlemail.com Wed Feb 28 22:16:15 2024 From: sabinehoffmann8 at googlemail.com (Sabine Hoffmann) Date: Wed, 28 Feb 2024 23:16:15 +0100 Subject: [esp-r] Re: Climate file TRY 2010 for Germany (Potsdam) in esp-r format? In-Reply-To: References: <96E107EE-3325-40A5-BA8D-0C9B82B6CDEE@googlemail.com> Message-ID: <0B41038F-6E5E-49AF-822B-4398EA438C5E@googlemail.com> Hi Graeme, wow, this was fast and easy. Perfect. Thanks so much! Sabine > Am 28.02.2024 um 22:20 schrieb Graeme Flett : > > Hi Sabine > > The link below has TRY2010 data for Potsdam. The zip file has several formats including epw and ESPr clm format. > > https://climate.onebuilding.org/WMO_Region_6_Europe/DEU_Germany/index.html > > Graeme > > From: esp-r-bounces at lists.strath.ac.uk on behalf of Sabine Hoffmann > Sent: 28 February 2024 19:33 > To: esp-r at lists.strath.ac.uk > Subject: [esp-r] Climate file TRY 2010 for Germany (Potsdam) in esp-r format? > > Dear (German) esp-r users, > > does anyone have TRY2010_4.epw for Potsdam, Germany, available, ideally already adjusted for use in esp-r? I would be extremely grateful. > > Best regards > > Sabine > > > _______________________________________________ > esp-r mailing list > esp-r at lists.strath.ac.uk > http://lists.strath.ac.uk/mailman/listinfo/esp-r -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.strath.ac.uk/archives/esp-r/attachments/20240228/95563712/attachment.html From sabinehoffmann8 at googlemail.com Mon Mar 4 20:55:33 2024 From: sabinehoffmann8 at googlemail.com (Sabine Hoffmann) Date: Mon, 4 Mar 2024 21:55:33 +0100 Subject: [esp-r] same surface temperatures despite different incident radiation Message-ID: Hi everybody, I rotated my model to the four cardinal directions and I get the expected typical values of solar radiation incident on the outer surfaces for the different orientations. However, I get the exact same outer surface temperature for all four orientations. I tripple checked the model and the results, but couldn?t find the missing link. Any clue anybody? Thanks, Sabine From sabinehoffmann8 at googlemail.com Mon Mar 4 22:11:14 2024 From: sabinehoffmann8 at googlemail.com (Sabine Hoffmann) Date: Mon, 4 Mar 2024 23:11:14 +0100 Subject: [esp-r] Re: Your message to esp-r awaits moderator approval In-Reply-To: References: Message-ID: Dear all, Ok, I found a solution by specifying different *.res libraries. Still strange, but would not exclude that the error has been on the user side. However, I encountered some issues with multicon.dbs before as well. Sabine > Am 04.03.2024 um 21:56 schrieb esp-r-bounces at lists.strath.ac.uk: > > Your mail to 'esp-r' with the subject > > same surface temperatures despite different incident radiation > > Is being held until the list moderator can review it for approval. > > The reason it is being held: > > Post by non-member to a members-only list > > Either the message will get posted to the list, or you will receive > notification of the moderator's decision. If you would like to cancel > this posting, please visit the following URL: > > http://lists.strath.ac.uk/mailman/confirm/esp-r/b98075ea7e32fdcd53abcd897b4e44d77e4bb448 > From ekoealoys at yahoo.fr Wed Mar 6 10:03:06 2024 From: ekoealoys at yahoo.fr (Ekoe Aloys) Date: Wed, 6 Mar 2024 11:03:06 +0100 Subject: [esp-r] Strategies for Deploying Virtual Representations of the Built Environment French version References: Message-ID: An HTML attachment was scrubbed... URL: http://lists.strath.ac.uk/archives/esp-r/attachments/20240306/ab7f0a12/attachment.html From joe at esru.strath.ac.uk Thu Mar 14 16:34:35 2024 From: joe at esru.strath.ac.uk (Joe Clarke) Date: Thu, 14 Mar 2024 16:34:35 +0000 Subject: [esp-r] New ESP-r release Message-ID: Hi All Source and pre-compiled installer for ESP-r V13.3.16 is now available in the usual place: https://www.esru.strath.ac.uk/applications/. Please see the update_notes file for details of the changes. You may wish to use a tool such as meld to scrutinise the changes, which are widespread throughout the source code. Regards, Joe From joe at esru.strath.ac.uk Thu Mar 14 17:56:52 2024 From: joe at esru.strath.ac.uk (Joe Clarke) Date: Thu, 14 Mar 2024 17:56:52 +0000 Subject: [esp-r] New ESP-r release Message-ID: <3a91845c-2515-41d3-8b2d-469368cf24d8@esru.strath.ac.uk> My apologies I meant V13.3.17. Joe From saeed.mohammadi at strath.ac.uk Wed May 8 20:50:58 2024 From: saeed.mohammadi at strath.ac.uk (Saeed Mohammadi) Date: Wed, 8 May 2024 19:50:58 +0000 Subject: [esp-r] make the building figures of high quality Message-ID: Hello ESP-r team, I hope you are well. I sent a print screen of a building model in esp-r, but it is unclear, and I have been asked to make the figures of high quality. Please let me know how to get a high-quality image from the ESP-r project manager. I am looking forward to hearing from you. With Thanks, Saeed -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.strath.ac.uk/archives/esp-r/attachments/20240508/5ffb135c/attachment.html From saeed.mohammadi at strath.ac.uk Fri May 10 09:35:06 2024 From: saeed.mohammadi at strath.ac.uk (Saeed Mohammadi) Date: Fri, 10 May 2024 08:35:06 +0000 Subject: [esp-r] Re: esp-r Digest, Vol 182, Issue 1 In-Reply-To: References: Message-ID: Good morning, Please find the below email to gain more information about the reason for sending an email. I am still looking for clear guidance to make a high-quality image of the building modelled in esp-r. With Thanks, Saeed ________________________________ From: esp-r-bounces at lists.strath.ac.uk on behalf of esp-r-request at lists.strath.ac.uk Sent: 09 May 2024 17:30 To: esp-r at lists.strath.ac.uk Subject: esp-r Digest, Vol 182, Issue 1 Send esp-r mailing list submissions to esp-r at lists.strath.ac.uk To subscribe or unsubscribe via the World Wide Web, visit http://lists.strath.ac.uk/mailman/listinfo/esp-r or, via email, send a message with subject or body 'help' to esp-r-request at lists.strath.ac.uk You can reach the person managing the list at esp-r-owner at lists.strath.ac.uk When replying, please edit your Subject line so it is more specific than "Re: Contents of esp-r digest..." Today's Topics: 1. make the building figures of high quality (Saeed Mohammadi) ---------------------------------------------------------------------- Message: 1 Date: Wed, 8 May 2024 19:50:58 +0000 From: Saeed Mohammadi Subject: [esp-r] make the building figures of high quality To: "esp-r at lists.strath.ac.uk" Message-ID: Content-Type: text/plain; charset="iso-8859-1" Hello ESP-r team, I hope you are well. I sent a print screen of a building model in esp-r, but it is unclear, and I have been asked to make the figures of high quality. Please let me know how to get a high-quality image from the ESP-r project manager. I am looking forward to hearing from you. With Thanks, Saeed -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.strath.ac.uk/archives/esp-r/attachments/20240508/5ffb135c/attachment-0001.html ------------------------------ _______________________________________________ esp-r mailing list esp-r at lists.strath.ac.uk http://lists.strath.ac.uk/mailman/listinfo/esp-r End of esp-r Digest, Vol 182, Issue 1 ************************************* -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.strath.ac.uk/archives/esp-r/attachments/20240510/4c6c3ad6/attachment.html From achim.geissler at acatalepsy.ch Fri May 10 09:48:44 2024 From: achim.geissler at acatalepsy.ch (achim.geissler) Date: Fri, 10 May 2024 10:48:44 +0200 Subject: [esp-r] Re: esp-r Digest, Vol 182, Issue 1 In-Reply-To: References: Message-ID: <9FF61466-A9D8-47B2-AD79-ADE2D77DA603@acatalepsy.ch> Hi Saeed, as far as I remember, the .dxf export of the model wire-frame still works. Then you could use any CAD program (or dxf viewer) to display / save in a high resolution. An alternativ would be using a high-resolution screen, blow up the model to cover the full screen and take a screen-shot of that (depending on what you have already tried ?). My 5 ct. Best Achim > On 10 May 2024, at 10:35, Saeed Mohammadi wrote: > > Good morning, > > Please find the below email to gain more information about the reason for sending an email. > > I am still looking for clear guidance to make a high-quality image of the building modelled in esp-r. > > With Thanks, > > Saeed > From: esp-r-bounces at lists.strath.ac.uk > on behalf of esp-r-request at lists.strath.ac.uk > > Sent: 09 May 2024 17:30 > To: esp-r at lists.strath.ac.uk > > Subject: esp-r Digest, Vol 182, Issue 1 > > Send esp-r mailing list submissions to > esp-r at lists.strath.ac.uk > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.strath.ac.uk/mailman/listinfo/esp-r > or, via email, send a message with subject or body 'help' to > esp-r-request at lists.strath.ac.uk > > You can reach the person managing the list at > esp-r-owner at lists.strath.ac.uk > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of esp-r digest..." > > > Today's Topics: > > 1. make the building figures of high quality (Saeed Mohammadi) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Wed, 8 May 2024 19:50:58 +0000 > From: Saeed Mohammadi > > Subject: [esp-r] make the building figures of high quality > To: "esp-r at lists.strath.ac.uk " > > Message-ID: > > > > Content-Type: text/plain; charset="iso-8859-1" > > Hello ESP-r team, > > I hope you are well. > > I sent a print screen of a building model in esp-r, but it is unclear, and I have been asked to make the figures of high quality. > Please let me know how to get a high-quality image from the ESP-r project manager. > I am looking forward to hearing from you. > > With Thanks, > Saeed > > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: http://lists.strath.ac.uk/archives/esp-r/attachments/20240508/5ffb135c/attachment-0001.html > > ------------------------------ > > _______________________________________________ > esp-r mailing list > esp-r at lists.strath.ac.uk > http://lists.strath.ac.uk/mailman/listinfo/esp-r > > End of esp-r Digest, Vol 182, Issue 1 > ************************************* > _______________________________________________ > esp-r mailing list > esp-r at lists.strath.ac.uk > http://lists.strath.ac.uk/mailman/listinfo/esp-r achim.geissler at acatalepsy.ch -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.strath.ac.uk/archives/esp-r/attachments/20240510/85169cbf/attachment-0001.html From grobe at gmx.net Fri May 10 09:50:57 2024 From: grobe at gmx.net (Lars O. Grobe) Date: Fri, 10 May 2024 10:50:57 +0200 Subject: [esp-r] Re: esp-r Digest, Vol 182, Issue 1 In-Reply-To: References: Message-ID: Hi Saeed, it is not clear to me (and possibly to others) what you consider a "figure of high quality". You can export summaries of the simulation results, zone composition, node networks etc. If you need a visualisation of a building model, a building performance simulation software such as ESP-r may be just the wrong tool. While you may generate some photo-realistic visualizations from light simulation (that is implemented by ESP-r's Radiance interface), I would rather have a look at a tool tailored to your needs, e.g. for drawings with dimensions I'd prefer a CAD tool, for 3D illustrations a modeller etc. From your mail, however, it is not clear what you need, and general issues of visualization or CAD drawing are not topics for this list. Best, Lars. P.S. Please note that it is not helpful to repeat questions or to fill up the list archives and mailboxes of subscribers with mails containing no new information. Am 10.05.24 um 10:35 schrieb Saeed Mohammadi: > Good morning, > > Please find the below email to gain more information about the reason > for sending an email. > > I am still looking for clear guidance to make a high-quality image of > the building modelled in esp-r. > > With Thanks, > > Saeed > ------------------------------------------------------------------------ > *From:* esp-r-bounces at lists.strath.ac.uk > on behalf of > esp-r-request at lists.strath.ac.uk > *Sent:* 09 May 2024 17:30 > *To:* esp-r at lists.strath.ac.uk > *Subject:* esp-r Digest, Vol 182, Issue 1 > Send esp-r mailing list submissions to > esp-r at lists.strath.ac.uk > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.strath.ac.uk/mailman/listinfo/esp-r > or, via email, send a message with subject or body 'help' to > esp-r-request at lists.strath.ac.uk > > You can reach the person managing the list at > esp-r-owner at lists.strath.ac.uk > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of esp-r digest..." > > > Today's Topics: > > ?? 1.? make the building figures of high quality (Saeed Mohammadi) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Wed, 8 May 2024 19:50:58 +0000 > From: Saeed Mohammadi > Subject: [esp-r]? make the building figures of high quality > To: "esp-r at lists.strath.ac.uk" > Message-ID: > > > Content-Type: text/plain; charset="iso-8859-1" > > Hello ESP-r team, > > I hope you are well. > > I sent a print screen of a building model in esp-r, but it is unclear, > and I have been asked to make the figures of high quality. > Please let me know how to get a high-quality image from the ESP-r > project manager. > I am looking forward to hearing from you. > > With Thanks, > Saeed > > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > http://lists.strath.ac.uk/archives/esp-r/attachments/20240508/5ffb135c/attachment-0001.html > > > ------------------------------ > > _______________________________________________ > esp-r mailing list > esp-r at lists.strath.ac.uk > http://lists.strath.ac.uk/mailman/listinfo/esp-r > > End of esp-r Digest, Vol 182, Issue 1 > ************************************* > > _______________________________________________ > esp-r mailing list > esp-r at lists.strath.ac.uk > http://lists.strath.ac.uk/mailman/listinfo/esp-r -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.strath.ac.uk/archives/esp-r/attachments/20240510/809a1a09/attachment.html From cheard at prodigy.net.mx Tue Jun 18 14:33:59 2024 From: cheard at prodigy.net.mx (Christopher Heard) Date: Tue, 18 Jun 2024 14:33:59 +0100 Subject: [esp-r] Path lengths on Mac M1 version Message-ID: <11CEE565-ACEE-4D01-848A-6EF291C7D3AD@prodigy.net.mx> Hi, the suggested location for the Models folder is in Users/username/Models - where in my case my username is quite long and I am not really wanting to change it - is there a suggestion for an alternative location because even if I use a six character project filename, I still run into the 96 character limit according to prj? Or should I invoke prj after doing a ?cd? into the Models folder - it doesn?t seem to work - but I probably are not specifying the path correctly. I can load the example projects and store them in /Users/myusername/Models but I can?t seem to get prj open them after exiting prj and restarting it. Probably it is a simple gotcha for someone who has not run ESP-r for a while except in Ubuntu. Christopher From cheard at prodigy.net.mx Tue Jun 18 15:12:27 2024 From: cheard at prodigy.net.mx (Christopher Heard) Date: Tue, 18 Jun 2024 15:12:27 +0100 Subject: [esp-r] Path lengths on Mac M1 version Message-ID: <0603B34A-3FDB-43F4-9B88-5A56C9D5F4BF@prodigy.net.mx> Oops! - got it sorted on invoking prj from the cfg folder - command line syntax error on my part From cheard at prodigy.net.mx Wed Jun 19 18:32:22 2024 From: cheard at prodigy.net.mx (Christopher Heard) Date: Wed, 19 Jun 2024 18:32:22 +0100 Subject: [esp-r] Adaptive behaviour model for flow network control - is there any documentation out there? Message-ID: Hi, I have been searching for a bit more explanation than in help in prj which just says ?human behaviour algorithm controlling windows and fans?. The parameters include one for A/C but I can find no documentation on this and I would like to combine window opening and use of A/C when outside temperatures exceed that which are useful for window opening. Ideally I would also like to take into account wind speed and when it gets over say 6m/s have the windows shut and A/C take over if needed. I realise that I will probably end up using a multi-sensor on/off control specification. Christopher From AdamWills at cmail.carleton.ca Wed Jun 19 18:54:41 2024 From: AdamWills at cmail.carleton.ca (Adam Wills) Date: Wed, 19 Jun 2024 17:54:41 +0000 Subject: [esp-r] Re: Adaptive behaviour model for flow network control - is there any documentation out there? In-Reply-To: References: Message-ID: Hi Christopher, The source code (src/eprj/bpfcontrol.F) references this paper: "Comfort Driven Adaptive Window Opening Behavior and the Influence of Building Design" by Tuohy, Rijal, Humphreys, Nicol, Samuel, and Clarke. The source code of the controller itself is in the subroutine FCL04 in src/emfs/mfcntl.F Cheers, Adam Get Outlook for Android ________________________________ From: esp-r-bounces at lists.strath.ac.uk on behalf of Christopher Heard Sent: Wednesday, June 19, 2024 1:32:22 PM To: esp-r at lists.strath.ac.uk Subject: [esp-r] Adaptive behaviour model for flow network control - is there any documentation out there? [External Email] Hi, I have been searching for a bit more explanation than in help in prj which just says ?human behaviour algorithm controlling windows and fans?. The parameters include one for A/C but I can find no documentation on this and I would like to combine window opening and use of A/C when outside temperatures exceed that which are useful for window opening. Ideally I would also like to take into account wind speed and when it gets over say 6m/s have the windows shut and A/C take over if needed. I realise that I will probably end up using a multi-sensor on/off control specification. Christopher _______________________________________________ esp-r mailing list esp-r at lists.strath.ac.uk https://can01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.strath.ac.uk%2Fmailman%2Flistinfo%2Fesp-r&data=05%7C02%7Cadamwills%40cmail.carleton.ca%7C5033fcb8ac674a1a298208dc908613f2%7C6ad91895de06485ebc51fce126cc8530%7C0%7C0%7C638544152745556336%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C0%7C%7C%7C&sdata=Q4VmDOqcmQa3eZY9WTMfs5pEE%2FImWADY%2B9lhsjt%2BuKg%3D&reserved=0 This email contains links to content or websites. Always be cautious when opening external links or attachments. Please visit https://carleton.ca/its/help-centre/report-phishing/ for information on reporting phishing messages. When in doubt, the ITS Service Desk can provide assistance. https://carleton.ca/its/chat -----End of Disclaimer----- -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.strath.ac.uk/archives/esp-r/attachments/20240619/b358f82f/attachment.html From cheard at prodigy.net.mx Mon Jun 24 09:52:21 2024 From: cheard at prodigy.net.mx (Christopher Heard) Date: Mon, 24 Jun 2024 09:52:21 +0100 Subject: [esp-r] Millennium bug in clm! (For 2100 weather data) Message-ID: <43F4F280-4C0B-4191-A7F2-A4922717E39B@prodigy.net.mx> Hi, just in case anyone was working with weather for 2100 - clm doesn?t like it - not because of the temperatures but the year! It complains that the date 1 1 2100 is illegal as well as 31 12 2100 However it does graph the data correctly. It does have a problem with the days of the week in the file management menu. The ASCII file looks alright. I will work around with a morphing to 2099 - given the uncertainties around future weather, then a one year difference in the analysis is not material. Christopher