[esp-r] Re: Phase change materials properties
Dariusz Heim
dariusz.heim at p.lodz.pl
Mon Jul 29 11:39:12 BST 2019
Dear Juanita,
The displayed unit for thermal conductivity should be W/(m^2K).
The detailed explanation about "a" and "b" you can find below:
https://github.com/ESP-rCommunity/ESP-rSource/blob/master/src/ebld/spmatl.F
line 4876 (case 2).
Good luck,
Darek
W dniu 29.07.2019 o 09:48, Juanita Solano Guzmán pisze:
> Hello to All,
>
> I am currently trying to figure out the meaning of the input values
> and units when defining a phase-change material.
>
> *- Melting temperature degC:* no questions
> *- Solidification temperature degC:* no questions
> *- Thermal conductivity in the solid phase J/kg: *In the ESPr
> interface the thermal conductivity is shown to have units of J/kg, I
> assume this is a mistake?
> *- Thermal conductivity in the liquid phase J/kg: *same as above
> *- Specific heat J/kg.K: *no questions
> *- Latent heat of member a J/kg.K^2 and b J/kg.K:* In a previous post
> I read that a and b, represent the values of a linear function y = ax
> + b. Woud this linear function correspond to the effective heat
> capacity given by:
>
> C_eff = L/(Te-To) + Cp(T=To)
>
> L - latent heat
> Te - Offset temperature
> To - Onset temperature
> Cp - specific heat at the onset temperature
>
> in that case, would "a" be equal to L/(Te-To) and "b" to Cp(T=To)?
> And then "x" in the linear function corresponds to the temperature?
>
> Thank you in advance for your help,
>
> Best Regards,
> Juanita
>
>
> _______________________________________________
> esp-r mailing list
> esp-r at lists.strath.ac.uk
> http://lists.strath.ac.uk/mailman/listinfo/esp-r
---
Politechnika Łódzka
Lodz University of Technology
Treść tej wiadomości zawiera informacje przeznaczone tylko dla adresata.
Jeżeli nie jesteście Państwo jej adresatem, bądź otrzymaliście ją przez pomyłkę
prosimy o powiadomienie o tym nadawcy oraz trwałe jej usunięcie.
This email contains information intended solely for the use of the individual to whom it is addressed.
If you are not the intended recipient or if you have received this message in error,
please notify the sender and delete it from your system.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.strath.ac.uk/archives/esp-r/attachments/20190729/6bf28c75/attachment.html
More information about the esp-r
mailing list