[esp-r] Yan: Re: cellular_pv example of esp-r

[Gül Nihal Güğül]

Hi Achim, Thank you for your reply I solved this problem by increasing number of panels in spm file. BestGul 

     1 Aralık 2014 21:06 Pazartesi tarihinde Achim Geissler <achim.geissler at intergga.ch> şöyle yazdı:
   

 Hi Gül,
the actual definition of the PV is in the "special materials" file (cfg folder of the model). Here you can set the number of panels / cells actually being used. Of course, you can optionally also "re-use" the definition for additional surfaces. There is no "hard link" between surface size in the model and PV size, however.
BestAchim
On Dec 1, 2014, at 3:53 PM, Gül Nihal Güğül <gulgugul at yahoo.com.tr> wrote:


Hi, There is an example in esp-r for fotovoltaics which is described in link --> http://www.esru.strath.ac.uk/Courseware/ESP-r/photovoltaics.htm There is an  PV modulesmounted on the existing Wall of manager_a. I want to enlarge this pv module. I am enlaging the module by changing its vertex coordinates and area of modüle becomes 2 times bigger however when I simulate and chech results analysis->electrical results-> total generation, total generation changes in very small  amount and is not 2 times bigger than first simulation. How can I add pv modules or enlarge existing modüle in order to get more electricity generation? Thanks for any help Best Gul  _______________________________________________
esp-r mailing list
esp-r at lists.strath.ac.uk
http://lists.strath.ac.uk/mailman/listinfo/esp-r

achim.geissler at intergga.ch




_______________________________________________
esp-r mailing list
esp-r at lists.strath.ac.uk
http://lists.strath.ac.uk/mailman/listinfo/esp-r

   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.strath.ac.uk/archives/esp-r/attachments/20141202/48e80ebb/attachment.html