[esp-r] Re: bash script, clm module problem

[Andrew Cowie]

Hi Dimitrios,

I had a very similar problem. Easiest workaround i found was to start the module individually, like this:

prj ... <<XZZ
[Stuff you need to do in prj]
-
clm ... <<XZZ
[Stuff you need to do in clm]
-

Regards,
Andy Cowie


Sent from my HTC


----- Reply message -----
From: "Dimitrios Sfakianakis" <dimitrios.sfakianakis at strath.ac.uk>
To: "esp-r at lists.strath.ac.uk" <esp-r at lists.strath.ac.uk>
Subject: [esp-r] bash script, clm module problem
Date: Thu, Dec 12, 2013 19:50



Dear List,

I am currently developing a bash script to automate a process. I'm opening the file in text mode and when selecting a different climate file, the clm module opens in a new window (a new command line where clm is in text mode). In this new command line the commands in my script are not executed.

Has anyone encountered this problem? Do you know if it's possible to input in this new command window?

Here is the script. The problem appears on the 12th line.

#!/bin/bash

for i in `ls /home/dsfakianakis/Elyros/ClimateFiles/*.clm`
do

prj -mode text -file Elyros.cfg << XZZ
b
a
b
<
$i
#at this point the clm module open in a new window and I have to manually close it for the script to continue.

-
y
y
-
-
XZZ

done


Thanks again for the support!!

Kind regards,

Dimitrios Sfakianakis MEng
Research Assistant, Dept. Naval Architecture and Marine Engineering, University of Strathclyde
Kelvin Hydrodynamics Laboratory, Acre Road, Glasgow, G20 0TL
T: +44 (0) 141 330 2648 (Ext 2648)
M: +44 07514271592
E: dimitrios.sfakianakis at strath.ac.uk
The University of Strathclyde is a charitable body, registered in Scotland, with registration number SC015263.

_______________________________________________
esp-r mailing list
esp-r at lists.strath.ac.uk
http://lists.strath.ac.uk/mailman/listinfo/esp-r