[esp-r] Re: temperature set point timestep by timestep

[Arianna Sdei]

HI Achim, yes can you please send me your model? Can you also please clarify the procedure you are referring to? Thank you, Arianna 

-----Original Message-----
From: Achim Geissler [mailto:achim.geissler at intergga.ch] 
Sent: 25 September 2013 18:57
To: Arianna Sdei
Cc: Jon Hand; esp-r at lists.strath.ac.uk
Subject: Re: [esp-r] temperature set point timestep by timestep

Dear Arianna,

if there is no exemplar available, I do have a model that uses tdf file data for set points in control. However, it is not a small  / easy one (kind of "if all else fails"). As far as I remember, though, setting this up was (fairly) straightforward via prj.

Best
Achim

On Sep 25, 2013, at 6:55 PM, Arianna Sdei <A.Sdei at brighton.ac.uk> wrote:

> HI Jon,
> 
> yes please let me know if you can find the exemplar and inform me of 
> the steps needed. The reason for doing that is to simulate an 
> intelligent heating control system that is installed in some houses. 
> The temperature recorded by the heating control varies throughout the 
> day, for simplicity I can use daily averages for the month of January. 
> So I will only have 31 temperature set points. Thank you,
> 
> Arianna
> 
> -----Original Message-----
> From: Jon Hand [mailto:jon at esru.strath.ac.uk]
> Sent: 25 September 2013 17:46
> To: Arianna Sdei; esp-r at lists.strath.ac.uk
> Subject: RE: temperature set point timestep by timestep
> 
> 
> It is possible to do this.  It uses a so-called temporal file which holds column temperature data (one per timestep) and this is associated with an ideal control law which then gets its setpoint from that source.  The specifics needed would need more verbose than would be appropriate for an email.  It should be possible to write down the specific steps needed.  There might be an exemplar model that demonstrates this - I would need to check this.
> 
> -Jon Hand
> ________________________________________
> From: esp-r-bounces at lists.strath.ac.uk 
> [esp-r-bounces at lists.strath.ac.uk] on behalf of Arianna Sdei 
> [A.Sdei at brighton.ac.uk]
> Sent: 25 September 2013 16:55
> To: esp-r at lists.strath.ac.uk
> Subject: [esp-r] Re: temperature set point
> 
> Hi All,
> 
> my previous email may not be that clear so I will try to be more 
> specific. I would like to use a set point temperature that varies 
> throughout the day. Can I do that in ESP-r? Please let me know,
> 
> thank you,
> 
> Arianna
> 
> From: esp-r-bounces at lists.strath.ac.uk 
> [mailto:esp-r-bounces at lists.strath.ac.uk] On Behalf Of Arianna Sdei
> Sent: 25 September 2013 16:07
> To: esp-r at lists.strath.ac.uk
> Subject: [esp-r] temperature set point
> 
> Dear All,
> 
> I would like to use some monitored internal temperature as a 
> temperature set point to calculate the heating load. I have daily 
> averages for the month of January at the moment, do you know if there 
> is a way in ESP-r to do that? I may be able to find some hourly data . 
> Please let me know,
> 
> Thank you
> 
> Arianna
> 
> Arianna Sdei
> 
> Research Fellow IFORE (Innovation For Renewal)
> 
> UNIVERSITY OF BRIGHTON
> 
> Moulsecoomb, Lewes Road, Brighton, BN2 4AT
> 
> direct line: 0044 (0)2036747268
> 
> mobile: 0044 (0)7981739024
> 
> 
> 
> ___________________________________________________________
> This email has been scanned by MessageLabs' Email Security System on behalf of the University of Brighton.
> For more information see http://www.brighton.ac.uk/is/spam/
> ___________________________________________________________
> 
> ___________________________________________________________
> This email has been scanned by MessageLabs' Email Security System on behalf of the University of Brighton.
> For more information see http://www.brighton.ac.uk/is/spam/
> ___________________________________________________________
> 
> ___________________________________________________________
> This email has been scanned by MessageLabs' Email Security System on behalf of the University of Brighton.
> For more information see http://www.brighton.ac.uk/is/spam/
> ___________________________________________________________
> 
> ___________________________________________________________
> This email has been scanned by MessageLabs' Email Security System on behalf of the University of Brighton.
> For more information see http://www.brighton.ac.uk/is/spam/
> ___________________________________________________________
> 
> ___________________________________________________________
> This email has been scanned by MessageLabs' Email Security System on 
> behalf of the University of Brighton.
> For more information see http://www.brighton.ac.uk/is/spam/
> ___________________________________________________________
> 
> _______________________________________________
> esp-r mailing list
> esp-r at lists.strath.ac.uk
> http://lists.strath.ac.uk/mailman/listinfo/esp-r
> 

achim.geissler at intergga.ch




___________________________________________________________
This email has been scanned by MessageLabs' Email Security System on behalf of the University of Brighton.
For more information see http://www.brighton.ac.uk/is/spam/
___________________________________________________________

___________________________________________________________
This email has been scanned by MessageLabs' Email Security
System on behalf of the University of Brighton.
For more information see http://www.brighton.ac.uk/is/spam/
___________________________________________________________