[esp-r] Re: temperature set point timestep by timestep

[Arianna Sdei]

HI Jon, 

yes please let me know if you can find the exemplar and inform me of the steps needed. The reason for doing that is to simulate an intelligent heating control system that is installed in some houses. The temperature recorded by the heating control varies throughout the day, for simplicity I can use daily averages for the month of January. So I will only have 31 temperature set points. Thank you,

Arianna 

-----Original Message-----
From: Jon Hand [mailto:jon at esru.strath.ac.uk] 
Sent: 25 September 2013 17:46
To: Arianna Sdei; esp-r at lists.strath.ac.uk
Subject: RE: temperature set point timestep by timestep


It is possible to do this.  It uses a so-called temporal file which holds column temperature data (one per timestep) and this is associated with an ideal control law which then gets its setpoint from that source.  The specifics needed would need more verbose than would be appropriate for an email.  It should be possible to write down the specific steps needed.  There might be an exemplar model that demonstrates this - I would need to check this.

-Jon Hand
________________________________________
From: esp-r-bounces at lists.strath.ac.uk [esp-r-bounces at lists.strath.ac.uk] on behalf of Arianna Sdei [A.Sdei at brighton.ac.uk]
Sent: 25 September 2013 16:55
To: esp-r at lists.strath.ac.uk
Subject: [esp-r] Re: temperature set point

Hi All,

my previous email may not be that clear so I will try to be more specific. I would like to use a set point temperature that varies throughout the day. Can I do that in ESP-r? Please let me know,

thank you,

Arianna

From: esp-r-bounces at lists.strath.ac.uk [mailto:esp-r-bounces at lists.strath.ac.uk] On Behalf Of Arianna Sdei
Sent: 25 September 2013 16:07
To: esp-r at lists.strath.ac.uk
Subject: [esp-r] temperature set point

Dear All,

I would like to use some monitored internal temperature as a temperature set point to calculate the heating load. I have daily averages for the month of January at the moment, do you know if there is a way in ESP-r to do that? I may be able to find some hourly data . Please let me know,

Thank you

Arianna

Arianna Sdei

Research Fellow IFORE (Innovation For Renewal)

UNIVERSITY OF BRIGHTON

Moulsecoomb, Lewes Road, Brighton, BN2 4AT

direct line: 0044 (0)2036747268

mobile: 0044 (0)7981739024



___________________________________________________________
This email has been scanned by MessageLabs' Email Security System on behalf of the University of Brighton.
For more information see http://www.brighton.ac.uk/is/spam/
___________________________________________________________

___________________________________________________________
This email has been scanned by MessageLabs' Email Security System on behalf of the University of Brighton.
For more information see http://www.brighton.ac.uk/is/spam/
___________________________________________________________

___________________________________________________________
This email has been scanned by MessageLabs' Email Security System on behalf of the University of Brighton.
For more information see http://www.brighton.ac.uk/is/spam/
___________________________________________________________

___________________________________________________________
This email has been scanned by MessageLabs' Email Security System on behalf of the University of Brighton.
For more information see http://www.brighton.ac.uk/is/spam/
___________________________________________________________

___________________________________________________________
This email has been scanned by MessageLabs' Email Security
System on behalf of the University of Brighton.
For more information see http://www.brighton.ac.uk/is/spam/
___________________________________________________________