[esp-r] Re: installation problems and support

[Jon Hand]

You can find out more about the options available in the Install script if 
you give the command:
  ./Install --help

In particular there is a --compiler_version flag that can be used.

Sorry about your frustrations. This forum is often able to respond quickly
to install questions.  The document you refer to says that the g++ compiler
is one of the necessary tools. Perhaps you missed this section of the
document. Page 6 give the commands needed to determine compiler
versions.

Regards, Jon Hand
________________________________________
From: esp-r-bounces at lists.strath.ac.uk [esp-r-bounces at lists.strath.ac.uk] On Behalf Of Karol Bandurski [karol.bandurski at put.poznan.pl]
Sent: 28 February 2012 17:02
To: esp-r at lists.strath.ac.uk
Subject: [esp-r]  installation problems

Dear All,

I am completely new in ESP-r and from 2 weeks I try to install it... I am relay frustrated.

Last time I have install Ubuntu 10.04 LTS (with polish language version) and I am trying install ESP-r using this document:
Installing Ubuntu 10.04 & 11.04 for use with ESP-r: http://www.esru.strath.ac.uk/Downloads/ESP-r_linux_binaries/Ubuntu_for_esp-r.rtf

But I get some error (below in green, bold text is translation of polish words).

Could you help me or advise (write) me the easiest way to install this program?

Karol Bandurski

karolb at IIS-ZOK-191:~/Src/cvsdude/development_branch/src$ sudo ./Install -d /usr/esru --gcc4 --reuse_ish_calcs
[sudo] password for karolb:

          ESP-r installation script.

Please consult the README file before commencing
installation.  This script will rebuild the ESP-r
modules on your system.  You can abort this process
at any time by pressing <control> c.

XML output support enabled.

Warning: Library libxslt could not be found.
XSLT formatting support disabled.

Please answer the following questions. Default answers
are in []. To accept the default, press return.

Your computer identifies itself as Linux
and processor as i686.
Is this information correct (y/n)? [y]
y

ESP-r can be built with the Sun Fortran 90, GNU or
intel compilers.
Compiler:
  (1) Sun fortran 90 (cc and f90)
  (2) GNU fortran (gcc 4.X and gfortran)
  (3) Intel fortran (icc, icpc and ifort)
2

Install with experimental XML output support? This may
significantly increase simulation run-time. (y/n) [n]
y
XML output enabled for bps
Graphics library: [2]
  (1) GTK graphics library
  (2) X11 graphics library
  (3) no graphics library (text-only application)
2

ESP-r can optionally retain debugging symbols and
object files for use with a debugging program such
as GDB.

Retain debugging symbols? (y/n) [n]
y
Install ESP-r database files? (y/n) [y]
y
Install training files? (y/n) [y]
y

The ESP-r directory tree does not exist at /usr/esru,
or may have been corrupted. The following directories are
required:
    /usr/esru/esp-r
    /usr/esru/esp-r/bin
    /usr/esru/esp-r/climate
    /usr/esru/esp-r/databases
    /usr/esru/esp-r/electric_loads
    /usr/esru/esp-r/lib
    /usr/esru/esp-r/manual
    /usr/esru/esp-r/xsl

Do you wish to create the ESP-r directory tree at
this location? (y/n) [y]
y

Proceed with installation of esp-r modules (y/n) [y]?
y

Installing ESP-r system. This may take some time.
    - gathering versioning information from svn... Unavailable!
mv: nie można przenieść `/home/karolb/esp-r.desktop' do `/home/karolb/Desktop/esp-r.desktop':  Nie ma takiego pliku ani katalogu (No such file or directory)
    - building disableGccFPE... Done.
    - building enableXML...
ERROR: could not build executable enableXML!
Compilation messages follow:
-----------------------------------------
Compilation of enableXML on wto, 28 lut 2012, 17:12:42 CET
Make command:
-------------
   make MCTYPE=lin MCC=gcc MCPL=g++ MFC=gfortran DESTdir=/usr/esru ESPdir=/usr/esru/esp-r WWLINK=unshared EXE= XINSTALLDIR=/usr CFLAGS=-I../include -I../shocc -I/usr/local/include -I../cetc/h3kreports -I/usr/include -I/usr/include -I/usr/include/libxml2 -I/usr/local/include/libxml2 -I/usr/include/libxslt -I/local/include/libxslt -DLIN -DX11 -g  FFLAGS=-I../include -I../shocc -I/usr/local/include -I../cetc/h3kreports -DLIN -DX11 -g -fno-automatic -DGCC4 LD_FLAGS= ULIBS=-L/home/karolb/Src/cvsdude/development_branch/src/lib -lversion -lfpe -lxesru -L/usr/lib -lX11 -lXML -lstdc++ -lxml2 xml_status= -f Makefile  enableXML >>.make_msg 2>&1

Make output:
------------
cd `pwd`/lib; \
make the_libH3KReports
make[1]: Wejście do katalogu (entering directory) `/home/karolb/Src/cvsdude/development_branch/src/lib'
rm -f ConfigureH3kReports.F ;
ln -s `pwd`/../cetc/h3kreports/ConfigureH3kReports.F . ;
gfortran  -I../include -I../shocc -I/usr/local/include -I../cetc/h3kreports -DLIN -DX11 -g  -fno-automatic  -DGCC4 -c ConfigureH3kReports.F
rm -f TReportsManager.cpp ;
ln -s `pwd`/../cetc/h3kreports/TReportsManager.cpp .;
g++  -I../include -I../shocc -I/usr/local/include -I../cetc/h3kreports -I/usr/include -I/usr/include -I/usr/include/libxml2 -I/usr/local/include/libxml2 -I/usr/include/libxslt -I/local/include/libxslt -DLIN -DX11 -g  -c TReportsManager.cpp
make[1]: g++: Polecenie nie znalezione (command not found)
make[1]: *** [TReportsManager.o] Błąd 127 (Error 127)
make[1]: Opuszczenie katalogu (leaving directory) `/home/karolb/Src/cvsdude/development_branch/src/lib'
make: *** [enableXML] Błąd 2 (Error 2)
-----------------------------------------
Install: Fatal error.
Executable enableXML could not be built!
Installation aborted.