[esp-r] Re: ESP-r - How to model a radiant source

[Achim Geissler]

Dear Sergio

there are possibly several approaches. E.g. you can model a surface in your zone at the desired location (actually a pair of back-to-back surfaces can float freely in your zone). Then you can define a heat source in this surface. The heated surface will act as radiant source.

If your radiant source is located at a wall, you could model an additional zone "behind" the surface (cut the surface into your wall) and set all boundary conditions of this additional surface to "adiabat". Then control the additional zone to the desired temperature. It will act as a radiant source.

Best
Achim



On Dec 16, 2010, at 3:55 PM, Sergio Segreto wrote:

> Dear ESP-r team,
>  
> might you post the procedure I should follow to model a radiant source located indoor? My intent is to model a heater or panel located at a specific point inside a room.
>  
>  
> Many thanks and kind regards,
>  
>  
> Sergio Segreto - Mechanical Engineer
> 
> D'Appolonia S.p.A.
> Innovation and Research Division
> 
> Via Farabola Est, 32 – 55049 Viareggio (Lucca) – Italy
> ( +39 0584 1840708    6 +39 0584 1841217
> * sergio.segreto at dappolonia.it
> URL: http://www.dappolonia.it
> 
> «Le informazioni contenute in questo messaggio di posta elettronica sono destinate esclusivamente agli individui e agli enti ai quali risulta indirizzato. Il suo contenuto (inclusi gli allegati) sono confidenziali e riservati: se Lei non è tra i destinatari originari non deve utilizzare, rivelare, trasmettere, copiare né stampare il suo contenuto; se Lei ha ricevuto questo messaggio di posta elettronica per errore , è pregato di avvisarci inviando un messaggio di posta elettronica all'indirizzo del mittente, e quindi cancellare e distruggere il messaggio dal Suo sistema» 
> «The information contained in this e-mail is intended only for the individual or entity to whom it is addressed . Its contents (including any attachments) are confidential and privileged: if you are not an intended recipient you must not use, disclose, disseminate, copy or print its contents; If you have received this email by mistake please notify us by emailing the sender, and then delete and destroy the email and any copies from your system»
> 
>  
> _______________________________________________
> esp-r mailing list
> esp-r at lists.strath.ac.uk
> http://lists.strath.ac.uk/mailman/listinfo/esp-r

achim.geissler at intergga.ch




-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.strath.ac.uk/archives/esp-r/attachments/20101217/2ba6e6b9/attachment.html