[esp-r] H3K / XML / CSV Output

[Ian McCall]

Hello Fellow ESP-r Community, 

1) I have recently been playing with the H3K / XML / CSV Output on the ESP-r 
native windows version. 


I ran the simulation at time steps of 20 minutes. When I look at the results 
file > sensible heating load ... I get a total value and list of values that 
look reasonable.
#Time BasseHeatInj(kW)
'00:30:30'       3.44
'01:30:30'       3.76
'02:30:30'       3.94
'03:30:30'       4.00
'04:30:30'       3.95
'05:30:30'       3.93
'06:30:30'       3.80
'07:30:30'       3.73
'08:30:30'       3.74
'09:30:30'       3.75
'10:30:30'       3.70

When I look at the CVS file the total supplied energy is the same as the above 
results file, but the individual hourly values fluctuate considerably and they 
do not match the sensible hourly heating requirements of the results file.
> building/all_zones/supplied_energy/net_flux: Net heat/cooling supplied to the 
>building (all zones). (kW) 
>

2.77
4.75
3.13
4.87
3.03
4.83
2.78
4.68
2.79
4.71
2.70
4.50

I have confirmed that these fluctuations occurs with time-steps of 1 hour, 30 
minutes and 20 minutes. It also occurs on ESP-r Linux version. Any ideas? 



2) When I go into the >Integrated Simulation >H3K Reports Configuration the menu 
seems to have a several sensitivities: 

- I can enable the H3K Reports but I cannot dis-able the reports (i.e. H3K 
Reports >> enabled) ... normally a second click should disable the reports and 
close the menus (i.e. H3K Reports >> disabled).
- There is no option of the output i.e. CVS or XLM (i.e. XSLT Formatted output) 
... it seems to output both files at the same time. Is this intentional? 

(There could be other sensitivities in the menu that I am unaware of because I 
don't normally use the ESP-r Linux version.) 


Regards,

Ian

Ecole des Mines de Nantes



      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.strath.ac.uk/archives/esp-r/attachments/20100825/c1682bc5/attachment.html