[esp-r] 答复: Re: XZIP software...

[Tang, David]

While Xzip was dead, it reincarnated as geo3d which is much powerful. See the attachment to judge. Best of all, it is free for all to use.
With it, along with the DXF importing toolkits, we have created complex buildings and imported/exported numerous complex DXF files successfully. I am sure many users in this group will agree with that. (not that some of them made lots of $$ using it ;-).
Anyone who interested is welcome to get in touch for download.

Regards,
david

(I had to remove the attached figure but will furnish upon request).


-----邮件原件-----
发件人: esp-r-bounces at lists.strath.ac.uk [mailto:esp-r-bounces at lists.strath.ac.uk] 代表 Jon Hand
发送时间: 2010年6月10日 5:02
收件人: Achim Geissler; David Garcia
抄送: esp-r at lists.strath.ac.uk
主题: [esp-r] Re: XZIP software...

XZIP might be long dead for most people.  DXF suffers from being both ugly and its inability to hold the kind of attributes that simulation needs.

And there are some new beasties on the block (Revit and ArchiCAD) and I have been testing out interfaces to both of these which bypass the DXF and generate a well populated (zones, constructions, operations)  ESP-r model (there are some limitations of course).

I am actually meeting today with a small company in Seoul Korea who is working on the ArchiCAD interface and I hope to find out what the availability is for general release (free and or paid) to the ESP-r community.

I also gave a recent presentation at eSim in Winnipeg Canada on this topic.  It would be interesting to find out who in the existing ESP-r community would be interested in access to plug-ins.  Please email me your comments and/or expressions of interest.

Regards, Jon Hand

________________________________________
From: esp-r-bounces at lists.strath.ac.uk [esp-r-bounces at lists.strath.ac.uk] On Behalf Of Achim Geissler [achim.geissler at intergga.ch]
Sent: 09 June 2010 21:17
To: David Garcia
Cc: esp-r at lists.strath.ac.uk
Subject: [esp-r] Re: XZIP software...

Hi David

to my knowledge, the xzip tools that are still lurking in ESP-r are obsolete (for quite some time now). I think the current development_branch (and next release) uses .dxf as default.

However, be aware that dxf import is also restricted (I never succeeded in importing more than, say, 3 or 4 zones with maybe 10 to 12 surfaces each at once).

Best
Achim



On Jun 9, 2010, at 4:56 PM, David Garcia wrote:

Hi,

I'm trying to make complex buildings in ESP-r, unfortunately the complex geometry made this task difficult to make in ESP-r, so I'm looking forward to third-party applications, I was searching in google for the XZIP tools, but it seems that  it doesn't exist... even at the IES website...

can some of you give me a link where I can download or buy this software?

Thanks

David Garcia

--
David GARCIA SANCHEZ
------------------------------------------------------------
Département Systèmes Énergétiques Environnement Ecole des Mines de Nantes 4, Rue Alfred Kastler 44300 Nantes France
------------------------------------------------------------
Email: david.garcia-sanchez at emn.fr<mailto:david.garcia-sanchez at emn.fr>
Tel: +33 (0) 2 51 85 82 14
Mobile: +33 (0) 6 78 15 08 09
Fax: +33 (0) 2 51 85 82 99
------------------------------------------------------------
_______________________________________________
esp-r mailing list
esp-r at lists.strath.ac.uk<mailto:esp-r at lists.strath.ac.uk>
http://lists.strath.ac.uk/mailman/listinfo/esp-r

achim.geissler at intergga.ch<mailto:achim.geissler at intergga.ch>





_______________________________________________
esp-r mailing list
esp-r at lists.strath.ac.uk
http://lists.strath.ac.uk/mailman/listinfo/esp-r


The information contained in this communication and its attachment(s) is intended only for the use of the individual to whom it is addressed and may contain information that is privileged, confidential, or exempt from disclosure. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this communication is strictly prohibited. If you have received this communication in error, please notify postmaster at owenscorning.com and delete the communication without retaining any copies. Thank you. 

Translations available: http://www.owenscorning.com/emailfooter.html