[esp-r] Re: Transparent layer properties

[Achim Geissler]

Hi Pedro

analyzing casual gain control for lighting via res is known to be buggy,
however, the actual calculations are O.K. if defined correctly.

Have you tried a simulation period with your control and without (the same
period) and compared e.g. cooling load or "solar entering" or some such
parameter? To see if there is any effect?

Achim


-----Original Message-----
From: esp-r-bounces at lists.strath.ac.uk
[mailto:esp-r-bounces at lists.strath.ac.uk] On Behalf Of Pedro Correia da
Silva
Sent: Mittwoch, 18. November 2009 10:59
To: esp-r at lists.strath.ac.uk
Subject: [esp-r] Transparent layer properties

Hello!

I'm using the control of the transparent layer properties to simulate 
the activation of a shading device, set by the indoor illuminance 
(around 1800lux). However, it is not working properly - I am verifying 
it analyzing the "Zone Casual Gains". Is there anyone experienced 
similar problems using this control? How can I solve it? I am using a 
ESP-r v11_7_4333 (windows).

Best regards,

-- 
Pedro Correia da Silva

FEUP - Faculty of Engineering of the University of Porto
Porto, PORTUGAL
http://www.fe.up.pt

_______________________________________________
esp-r mailing list
esp-r at lists.strath.ac.uk
http://lists.strath.ac.uk/mailman/listinfo/esp-r