[esp-r] Fwd: Re: Re: CFD problem

[Aizaz Samuel]

Nalin,

There is a bug in the code there. It has now been fixed and should soon be
available in the next release. In the meantime change your boundaries so that
the openings are not in the south and north face but in the east and west
face of the CFD grid, or replace your source file esruprj/edcfd.F by the
attached and recompile.

Regards,
Aizaz

On Monday 04 May 2009 11:20, NALIN SWAROOP wrote:
> Dear Monika
>
> The problem is not with the walls, I have conflated the CFD defined walls
> with the construction Walls and it works fine but if I try to conflate the
> openings with the network flow connection it gives the error "cells are
> not compatible with chosen face please redefine" I have again attached the
> CFD definition file the lines which define the airflow are not changed
> because ESP-r gives the above mentioned error.
>
> Regards
>
> Nalin
>
> > Dear Nalin,
> >
> > Did you have tried a conflation of the walls like that?
> >
> > # Solid boundary conditions.
> > *solids
> > Wall3        Temp  25.00   | Confl   4  wallx
> > Wall4        Temp  25.00   | Confl   3  wally
> > Wall5        Temp  25.00   | Confl   11  wallz
> >
> >
> > The walls created in cfd must related to the walls in the zone-model:
> > p.e. wallx, wally and wallz
> > But I don`t know  what are the numbers 4, 3, 11 for.
> >
> > Regards
> > Monika
> >
> >
> > -----Ursprüngliche Nachricht-----
> > Von: esp-r-bounces at lists.strath.ac.uk
> > [mailto:esp-r-bounces at lists.strath.ac.uk] Im Auftrag von NALIN SWAROOP
> > Gesendet: Montag, 4. Mai 2009 08:39
> > An: Aizaz Samuel
> > Cc: esp-r at lists.strath.ac.uk
> > Betreff: [esp-r] Re: CFD problem
> >
> > I changed the lines
> >
> > Open1        Whole    6  25   1   1  11  20
> > Open2        Whole    6  25  25  25  11  20
> >  to:
> > Open1        South    6  25   1   1  11  20
> > Open2        North    6  25  25  25  11  20
> >
> > and now grid error is not coming but still I am not able to do the CFD
> > and air flow network conflation every time I try to define the boundary
> > condition for open1 or open2 and choose the connections from network flow
> > it gives the error that "cells are not compatible with chosen face please
> > redefine"
> >
> > Please help
> >
> > Nalin
> >
> >> Nalin,
> >>
> >> In the cfd file change the following lines:
> >> Open1        Whole    6  25   1   1  11  20
> >> Open2        Whole    6  25  25  25  11  20
> >>
> >> to:
> >> Open1        South    6  25   1   1  11  20
> >> Open2    %2

-------------------------------------------------------

-- 
Dr Aizaz A Samuel
Research Fellow
Department of Mechanical Engineering
University of Strathclyde
M324 James Weir Building
75 Montrose Street
Glasgow, UK
G1 1XJ

T:+44 141 548 5765
F:+44 141 552 5105
-------------- next part --------------
A non-text attachment was scrubbed...
Name: edcfd.F.zip
Type: application/x-zip
Size: 35849 bytes
Desc: not available
Url : http://lists.strath.ac.uk/archives/esp-r/attachments/20090506/8bd83902/attachment-0001.bin