[esp-r] Re: ceiling panel simulation

[Jon Hand]

There is an exemplar model that implements a chilled ceiling
via the 'thin zone' technique.  Check that one out for the control
logic needed.
 
I am also interested in whether the ground slab systems model
would be useful if it were placed between two zones.
 
-Jon Hand

________________________________

From: esp-r-bounces at lists.strath.ac.uk 이(가) 다음 사람 대신 보냄 Marco Manzan
Sent: 10/8/2008 (수) 6:21 오후
To: esp-r at lists.strath.ac.uk
Subject: [esp-r] ceiling panel simulation



hi to all

Is the slab on grade radiant floor model used in rhc-plant.cfg example 
suitable for simulating ceiling panel cooling or heating? are there 
different methods to deal with this problem?
I 'm considering also a simple flux injection into the ceiling 
structure, but in this case I think I have to control surface 
temperature too with a multi sensor heating/cooling.
.
I thanks in advance anyone who can help me

--
  _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
|Marco Manzan               Email: manzan at units.it            |
|Tel:   (+39) 040 5583506   Fax  : (+39) 040  572033          |
|Dipartimento di Ingegneria Navale, del Mare e per l'Ambiente |
|Universita' degli Studi di Trieste                           |
|piazzale Europa 1, 34127 TRIESTE                             |
|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|

----------------------------------------------------------------
This message was sent using IMP, the Internet Messaging Program.



_______________________________________________
esp-r mailing list
esp-r at lists.strath.ac.uk
http://lists.strath.ac.uk/mailman/listinfo/esp-r