[esp-r] Re: warnings

[Jon Hand]

A single layer thickness of 1.5m is going to make the solver
work very very very hard.  Recommend you create at least 3 and, if possible
about 6 layers to represent such a thick construction.  There is advise
in several places in the interface and in the documentation that
suggests how to deal with thick constructions.  The interface
probably warned you when you were creating this thick layer.

There is no real material that has absolute absorption
and so it warns you.  Put in 0.999 will be very close
to that absolute state.

-Jon Hand


-----Original Message-----
From: esp-r-bounces at lists.strath.ac.uk on behalf of Danny Bishop
Sent: Mon 5/12/2008 12:38 AM
To: esp-r at lists.strath.ac.uk
Subject: [esp-r]  warnings
 
Hi All
Can anyone tell me what the following errors are trying to tell me, and if
it is a problem, and also if this sort of info is documented anywhere?

WARNING: in ./test_building.con:     0.83680,   1300.000,  1046.00000,
1.50000,    0,   0.00,                             
  0.00000,   0.00000

 the thick (m) value (1.5000) > normal  maximum 0.50000!

 

WARNING: in ./test_building.con:  0.322 1.000 0.322 1.000 1.000 1.000 0.190

 the inside face abs value (1.0000) > normal  maximum 0.99900!          

cheers
Danny