[esp-r] Re: convection-radiation

[Nicolas Kelly]

Leen, 

ESP-r allows you to do this for any building control law by selecting
actuator type 'b mix of convection and radiation' when defining a
building control law; this actuator allows you to set the radiant and
convective emissions from a simple building controller (i.e.
pseudo-plant) without the need to develop a detailed plant model. 

I'll get back to you on the other questions you asked! 

Nick Kelly,

On behalf of ESRU

*******************************
Dr Nick Kelly
RCUK Academic Fellow
Energy Systems Research Unit
Institute for Energy and Environment
University of Strathclyde
75 Montrose St
Glasgow G1 1XJ
t: +44(0)141 548 2854
f: +44(0)141 552 5105
e: nick at esru.strath.ac.uk
*******************************

-----Original Message-----
From: esp-r-bounces at lists.strath.ac.uk
[mailto:esp-r-bounces at lists.strath.ac.uk] On Behalf Of Leen Peeters
Sent: 17 July 2007 09:14
To: esp-r at lists.strath.ac.uk
Subject: [esp-r] convection-radiation

Dear all,

Is there a way to have heat/cold emission in a room, defining the 
percentages of radiative heat transfer and convective heat transfer, 
without having to define a plant configuration. It woul be like adding 
the percentages of convective and radiative heat transfer to the ideal 
basic control.

Thanks in advance



Disclaimer: http://www.kuleuven.be/cwis/email_disclaimer.htm


_______________________________________________
esp-r mailing list
esp-r at lists.strath.ac.uk
http://lists.strath.ac.uk/mailman/listinfo/esp-r