[esp-r] Re: about the *sflr line in configuration files....

[Nuno Fernandes]

Thanks Jon

 

I have already added the flow network to the simulation parameter and it
resolves half of the problem.

It still appears the message: 

 

Warning: in CdF_v1.cfg past end of line for node name in


Reading configuration line


 

0,10,11,1,2,0,0,0,0,0,0,0,0,0,0,0,13,14,15,16,5,12,0,0,0,0,0,3,0,0,0,0,0,0,0
,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, 

 

 

Does this have to do with the number of parameters in the fluid flow
network? Nodes, conections and components.

 

Tanks in advance

 

Nuno Fernandes

 

################################################# 

  Nuno Tiago Afonso Fernandes

 

  Universidade de Aveiro

  Departamento de Engenharia Mecânica

  Campus Universitário de Santiago  

  3810-193 Aveiro  

  Portugal

  Tel.: +351 234 370 830

  nuno.fernandes at mec.ua.pt

  www.ua.pt <http://www.ua.pt/> 

##########################################################

 

 

  _____  

From: esp-r-bounces at lists.strath.ac.uk
[mailto:esp-r-bounces at lists.strath.ac.uk] On Behalf Of Jon Hand (clcv10)
Sent: terça-feira, 28 de Novembro de 2006 12:56
To: Nuno Fernandes
Cc: esp-r at lists.strath.ac.uk
Subject: [esp-r] about the *sflr line in configuration files....

 

A recent question about flow results....

 

WARNING in CdF_v1.cfg: chars not found for netw res string in:

*sflr

Warning: in CdF_v1.cfg past end of line for node name in


Reading configuration line


 

The line in the model configuration file beginning with *sflr

is related to the definition of a simulation parameter set. A simulation

parameter set holds information about one or more pre-defined

simulations and holds information such as the period to be simulated

and the name of the file(s) to save zone and flow and systems

information to.

 

A message like this tends to happen when an existing model

with an existing simulation parameter set has added to it a

flow network.  The project manager does not automatically

update the simulation parameter set.  And you can do this

manually in the simulation pararameter set menu.  Once

this information is included in your model the warning message

will no longer show up.

 

-ESRU

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.strath.ac.uk/archives/esp-r/attachments/20061128/9be33d39/attachment-0001.html